iPrep 101 v006.1 Update Options

[Xbox-Scene]

iPrep 101 v006.1 Update Posted by XanTium | January 20 22:18 EST | News Category: Xbox360

Klutsh released a small update of iPrep 101(info), a .NET application and collection of MSDOS scripts/applications for use in flashing a Samsung TS-H943A or BenQ DVD drives. What's new/fixed: * Fixes a typo in the DOS Samsung batch files. * To use just replace the iPrep101.exe in the programs directory. Official Site: x-projects.org Download Update: here

[africamagical]

sweeeet that typo is what kept me from using this app,
but now im ditching mtkflash for iprep!

[Xijar]

No wonder this app bricked my Xbox!

$#&*ing typo!

[mlapaglia]

No wonder this app bricked my Xbox!

$#&*ing typo!

I'm pretty sure it says "use at own risk" right in the readme.

[eXPerience]

with this update, the app doesn't find my sata devices!!

[Klutsh]

No wonder this app bricked my Xbox!

$#&*ing typo!

Nope, Would just cause MTKFlash to freeze before starting to read or dump the drive.

with this update, the app doesn't find my sata devices!!

Strange, no part of that code was changed.

[fitsman]

The problem that has with benq batch file as it says it the "hacking the xbox360 for noobs 2008" it fixed in this version of iperep or not?

The problem that "hacking the xbox360 for noobs 2008" says :

You will then see this screen which tells you to power OFF the 360:

IMAGE

IMPORTANT! You must power the 360 back ON before pressing any key to continue.

If you press any key to continue with the 360 powered OFF (as instructed to do on screen) it will immediately
freeze attempting to write Bank 0. This is a bug in iPrep 006 and will hopefully be resolved in a future release.
So power the 360 OFF, wait a few seconds, power it ON, wait a few seconds, then press any key to continue.

Writing should begin as soon as you press any key to continue with the 360 already powered ON. All 4 banks should write OK and you should get a “Writing finished!” message with a Datasum....

[Klutsh]

The problem that has with benq batch file as it says it the "hacking the xbox360 for noobs 2008" it fixed in this version of iperep or not?

The problem that "hacking the xbox360 for noobs 2008" says :

You will then see this screen which tells you to power OFF the 360:

IMAGE

IMPORTANT! You must power the 360 back ON before pressing any key to continue.

If you press any key to continue with the 360 powered OFF (as instructed to do on screen) it will immediately
freeze attempting to write Bank 0. This is a bug in iPrep 006 and will hopefully be resolved in a future release.
So power the 360 OFF, wait a few seconds, power it ON, wait a few seconds, then press any key to continue.

Writing should begin as soon as you press any key to continue with the 360 already powered ON. All 4 banks should write OK and you should get a “Writing finished!” message with a Datasum....

I was'nt aware of that, I will look into it, however the Batch files are just copy paste near enough of eXOBeX's batch files.

[matt77303]

I have never used this program before so i thought i would give it a try.

anyway installed ok but when i go to load up 'any' ixtreme firmware it comes up with an error, no valid firmware loaded. any ideas or should i just go back to mtkflash.

Thanks Matt

[MY99]

go toTools> check for updates

[matt77303]

brillinat thanks, so simple.

Thank you Matt

[fitsman]

The problem that has the iprep 101 006.1 with benq flash procedure i talk to my preview post it fixed or not?

[kallardnyc]

Will this update fix my problem? The problem is that the dsam dump on the MS28 drive is stopping at 01% and writing a sam-ofw.bin file at 1kb. Will this dump the proper sam-ofw.bin size?