Group: Members
Posts: 3
Joined: 26-February 08
Member No.: 374478
I have read all the tutorials and am confident in modding my v1.0 xbox. The one question they don't answer is this: Does your xbox need to be able to boot with it's own BIOS before I mod it? In other words, I have the screen where it tells me that in 6 different languages that there is a software or hardware error (v1.0 does not give error code numbers). Can I install a modchip to override any underlying firmware/software issues? Thank you. I looked and searched and have not found a post regarding this or said similar issues.
Group: Members
Posts: 3
Joined: 26-February 08
Member No.: 374478
ok, say it was a bad hard drive. Is it then possible to put a mod chip in and simultaneously replace the hard drive? Or do you need a hard drive with the FATX file system on it first, before you mod it?
Group: Moderator
Posts: 2737
Joined: 5-April 07
Member No.: 337188
Xbox Version: v1.0
360 version: none
Hi,
with a modchip and the correct bios, you should be able to boot the xbox from a dvd or cdrw, even with a blank harddisk connected to the xbox. You can use something like the Slayers rescue disk to partition and format the new disk.
Group: Members
Posts: 3
Joined: 26-February 08
Member No.: 374478
Thanks for the reply. Last question is: Do you recommend a particular chip for such a swap? I have read on some tutorials that in order for the mod to work, you must start with a working xbox. Most of the online stores have sold-out of certain models. Thanks.