QUOTE(dpbmt @ Aug 5 2008, 10:35 PM)
follow the instructions of what to do when you boot into iprep
Ahhh good deal, thank you very much for your input!! Does this look about right:
"step 1: put USB stick into USB slot
2: open up iPrep
3: load firmware definition (1.4)
4: select drive letter from drop down box
5: click on patch mtk thing i believe, and then hit make bootable
6: shut down computer
7: deassemble 360 and hook the dvd drive up to the PCI card
8: turn computer on, boot off the USB stick
9: follow command prompts and select master i believe (it will put the orig.bin on the USB stick after you run the dsam 1234567 12345 command.)
10: shut down 360 and computer and restart into windows
11: open up Firmware toolbox and make sure the FW it dumped is a legit one. if so move on, it is all FFFFFFFFFFFFFFFFF or 77777777777 open up the backup folder and copy the key from there and paste it into the key from the 'original' folder.
12: restart computer and boot off the USB drive.
13: follow command promts and run the fsam 1234567 12345 command to erase/flash the drive with the 'hacked' firmware.
14: shut down 360 and computer
15: put a game in it to make sure it plays. "
Thanks very much. Also, if you wouldn't mind, do you think these directions would be exactly the same no matter if the drive is an ms25 or ms28? Thanks so much!!!