Xecuter CK3 Tool v1.0 Options

[Xbox-Scene]

Xecuter CK3 Tool v1.0 Posted by XanTium | November 12 22:25 EST | News Category: Xbox360

From team-xecuter.com: [QUOTE] Connectivity Kit 3 (CK3) Tool v1.0 Released: 11/12/2008 Version: 1.0 Features: Dump the key.bin and inquiry.bin from Liteon Drives Dump the key.bin and inquiry.bin from Benq Drives Hitachi Modeb (Including 078 and 079) 79 Unlock - Remove lock protection from Hitachi 079 Detect the complete range of IDE/SATA Devices/Ports Detect IO port and Drive Name of any Xbox 360 drive Auto Detect CK3 Pro Compatible with CK3 Pro and CK3 Lite Online Update Checker Includes new PortIO32 drivers Includes CK3 USB drivers for 98/ME/2K/XP/Vista More To Come Soon ! [/QUOTE] Official Site: http://team-xecuter.com Download: here

[comhen]

Great Stuff Xecuter, can't wait to try this

[Magixx]

If this thing can flash all drives without the need of soldering and in Windows I will be buying one for sure.

[didineedthis]

If this thing can flash all drives without the need of soldering and in Windows I will be buying one for sure.

you will still have to bride r707 and r708 for the liteon drives


didineedthis

[BoNg420]

you will still have to bride r707 and r708 for the liteon drives
didineedthis

think you only need to do the TX, not both

[Substance90]

I wasn`t able to install it on my XP xbox-hacking machine, gives me Don`t send error and on my Vista PC the install goes well, but when I start ui.exe it says missing "MSINET.ocx"

[Ree1981]

think you only need to do the TX, not both

You only need a small kynar wire going into the small hole above the 2 soldering points. Some people use a screwdriver, but that also requires some soldering. I just stick a small kynar wire in there that goes straight to the TX on the serial adaptor. Work _every_ time, and I've done it probably 60 times now.

[Nismo]

I wasn`t able to install it on my XP xbox-hacking machine, gives me Don`t send error and on my Vista PC the install goes well, but when I start ui.exe it says missing "MSINET.ocx"

Same here, Vista 32-bit :/

[greengiant]

Try here http://www.ocxdump.com/cgi-bin/testwrap/do...es/M/MSINET.OCX for the ocx file

[enkur]

right click on file (start ui.exe) and run it as "administrator"

This post has been edited by enkur: Nov 14 2008, 02:10 AM

[gamer082009]

You only need a small kynar wire going into the small hole above the 2 soldering points. Some people use a screwdriver, but that also requires some soldering. I just stick a small kynar wire in there that goes straight to the TX on the serial adaptor. Work _every_ time, and I've done it probably 60 times now.

OK, I feel like an idiot for asking this, but what is TX that you're refering to? And also, is it possible to at least dump the key without using the Connectivity Kit 3(CK3). I guess I'm confused as to if I just need to bridge R707 and R708, and then try and dump it...or do I need the connectivity kit 3 too. I'm really trying to figure out a way to do it, because I'm unable to get the connectivity kit at the moment. Damn Microsoft banned my Benq 360, and now I went out and spent the last of my money buying a new 360 only to find out the bitch has a Lite-On drive...exchanged it again and I'll be damn another Lite-on. So basically I'm screwed. Your help would be much appreciated

[SNAAAKE]

edit: wrong thread.

This post has been edited by SNAAAKE: Nov 17 2008, 02:45 PM