Tutorial: Backup/burn/stealth Verify With Xbc & Imgburn, Questions and Discussion Options

[geckoh]

Why does it say in the guide that ripping takes 30+ minutes? it took me 7-8 minutes, and checked with abgx, no problems...

Is there a reason why it takes 30+ minutes, so did I do something wrong?

[PhoneyVirus]

So from what I read in the Tutorial

ABGX and Mulleter DB: No discussion on Online Database portion of such tools.

* These tools are of no use if you did the backup yourself, you know that all these stealth components match together because you extracted them from the same original
* You need a drive (kreon or X360) that can extract the SS, and as a result you can just do a "complete Backup" right from the start, and no need to inject anything
* Using these tools to change stealth component is the equivalent to downloading stealth file which against our rules

After I do a "complete Backup" with my BenQ VAD6038, extract the SS and no need to inject anything like ABGX or Mulleter, then burn them to a disc can I go online just like the Original and if so OMG now I got all my games full with something lucky I never Burned them yet Thank you if this is right.

*** NOTE ***
This build of XBC does not support older Xtreme ripping firmwares
(Kreon drives are still supported though)
Stealth Checking verbiage/intent removed, XBC only does limited checking.

[grandpa69]

This is my first time doing a back-up, I am using XBC v2.9. Under write I select complete back-up and hit start. When I went to burn with XBC the SS passes PFI validation failed mismatching DMI passes and everything else did not test and stealth fails. So I went to verify with ABGX and everything passes so what is right, XBC or ABGX? Will it be safe for live?

[PhoneyVirus]

This is my first time doing a back-up, I am using XBC v2.9. Under write I select complete back-up and hit start. When I went to burn with XBC the SS passes PFI validation failed mismatching DMI passes and everything else did not test and stealth fails. So I went to verify with ABGX and everything passes so what is right, XBC or ABGX? Will it be safe for live?

Forget about Live use Schtrom360 Xtract S360X v4.1 make two copy's from the Original verify with S360X or ABGX360 but do so offline Read my Guide about verifying with ABGX360. Also burn with Imgburn Read Schtrom360 Xtract Guide at the end of the tutorial about using Imgburn alone and not XBCr v2.9.0.306.

Pinned:: **HOW TO CREATE WORKING 360 BACKUPS

[grandpa69]

Forget about Live use Schtrom360 Xtract S360X v4.1 make two copy's from the Original verify with S360X or ABGX360 but do so offline Read my Guide about verifying with ABGX360. Also burn with Imgburn Read Schtrom360 Xtract Guide at the end of the tutorial about using Imgburn alone and not XBCr v2.9.0.306.

Pinned:: **HOW TO CREATE WORKING 360 BACKUPS

So if it passes with ABGX360 it should be good including playing on live right? Any idea why stealth would fail with XBC? I do burn with Imgburn and wiill try S360X v4.1.Thanks

[PhoneyVirus]

So if it passes with ABGX360 it should be good including playing on live right? Any idea why stealth would fail with XBC? I do burn with Imgburn and wiill try S360X v4.1.Thanks

I just got done answering the same Question lol

Make two copy's from the Originals verify them with S360X or ABGX360 but do so offline!

Why ?

Because of there DB database that holes info from everyone might be wrong PFI DMI etc. There is no reason to use (Verify if Stealth Passes under the Options Tab) also read the info they have provided by hovering your mouse over the blue dot beside (Verify if Stealth Passes under the Options Tab) and Read my Guide everything you need to know is there Plus more hope this helps

Pinned:: **HOW TO CREATE WORKING 360 BACKUPS

Forget about online with any version of FW and if you got a Liteon drive iX v1.6 and looking to play Wave 4 or 5 games your going to need Activate iso witch is the only way for now, that's if you play Wave 4 games Activate iso One Shot Boot disc hope this help.

BenQ and Samsung with iX v1.61 can boot all Wave 4 games and for the Liteon drive I think this is how it goes you can't use no other version of FW why because there was never a version created for the Liteon besides iX v1.6 for more info on this just look through Xbins server.

[xcapeartist]

im having a problem with imgburn, getting a I/O error while its verifying sectors.



I 22:08:58 ImgBurn Version 2.5.6.0 started!
I 22:08:58 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)
I 22:08:58 Total Physical Memory: 1,039,736 KB - Available: 290,528 KB
I 22:08:59 Initialising SPTI...
I 22:08:59 Searching for SCSI / ATAPI devices...
I 22:08:59 -> Drive 1 - Info: ATAPI iHAS424 B GL1A (D:) (ATA)
I 22:08:59 Found 1 DVD±RW/RAM!
I 22:10:50 Operation Started!
I 22:10:50 Source File: E:\XBOX ISO's (COMPLETE)\Elder Scrolls V Skyrim\Skyrim.dvd
I 22:10:50 Source File Sectors: 4,267,015 (MODE1/2048)
I 22:10:50 Source File Size: 8,738,846,720 bytes
I 22:10:50 Source File Volume Identifier: DVD_ROM
I 22:10:50 Source File Volume Set Identifier: 90bd4000MS UDFBridge
I 22:10:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 22:10:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 22:10:50 Source File File System(s): ISO9660, UDF (1.50)
I 22:10:50 Destination Device: [2:1:0] ATAPI iHAS424 B GL1A (D:) (ATA)
I 22:10:50 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65)
I 22:10:50 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 22:10:50 Destination Media Sectors: 4,267,040
I 22:10:50 Write Mode: DVD
I 22:10:50 Write Type: DAO
I 22:10:50 Write Speed: 2.4x
I 22:10:50 Link Size: Auto
I 22:10:50 Lock Volume: Yes
I 22:10:50 Test Mode: No
I 22:10:50 OPC: No
I 22:10:51 BURN-Proof: Enabled
W 22:10:51 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 22:10:51 The drive only supports writing these discs at 4x, 6x, 8x.
I 22:10:51 Book Type Setting: DVD-ROM
I 22:10:51 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 22:10:51 Optimal L0 Data Zone Capacity: 2,133,520
I 22:10:51 Optimal L0 Data Zone Method: Copied From Original Disc
I 22:10:51 Set L0 Data Zone Capacity Succeeded!
I 22:10:52 Filling Buffer... (40 MB)
I 22:10:53 Writing LeadIn...
I 22:12:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 22:12:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 22:12:09 Writing Layer 0... (LBA: 0 - 2133519)
I 22:25:24 Writing Layer 1... (LBA: 2133520 - 4267014)
I 22:38:47 Synchronising Cache...
I 22:38:54 Closing Track...
I 22:38:55 Finalising Disc...
I 22:39:30 Exporting Graph Data...
I 22:39:30 Graph Data File: C:\Users\BRETT\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_MONDAY-NOVEMBER-14-2011_10-10_PM_MBIPG101-R10-65_2.4x.ibg
I 22:39:30 Export Successfully Completed!
I 22:39:30 Operation Successfully Completed! - Duration: 00:28:39
I 22:39:30 Average Write Rate: 5,340 KB/s (3.9x) - Maximum Write Rate: 5,650 KB/s (4.1x)
I 22:39:30 Cycling Tray before Verify...
W 22:39:38 Waiting for device to become ready...
I 22:39:53 Device Ready!
I 22:39:53 Operation Started!
I 22:39:53 Source Device: [2:1:0] ATAPI iHAS424 B GL1A (D:) (ATA)
I 22:39:53 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MBIPG101-R10-65)
I 22:39:53 Source Media Supported Write Speeds: 4x, 6x, 8x
I 22:39:53 Image File: E:\XBOX ISO's (COMPLETE)\Elder Scrolls V Skyrim\Skyrim.dvd
I 22:39:53 Image File Sectors: 4,267,015 (MODE1/2048)
I 22:39:53 Image File Size: 8,738,846,720 bytes
I 22:39:53 Image File Volume Identifier: DVD_ROM
I 22:39:53 Image File Volume Set Identifier: 90bd4000MS UDFBridge
I 22:39:54 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 22:39:54 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 22:39:54 Image File File System(s): ISO9660, UDF (1.50)
I 22:39:54 Read Speed (Data/Audio): MAX / MAX
I 22:39:55 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 22:39:55 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 22:39:55 Verifying Layer 0... (LBA: 0 - 2133519)
I 22:46:39 Verifying Layer 1... (LBA: 2133520 - 4267014)
W 22:47:01 Failed to Read Sector 2153120 - Reason: L-EC Uncorrectable Error
W 22:59:17 Retrying (1)...
W 22:59:24 Retry Failed - Reason: L-EC Uncorrectable Error
W 22:59:27 Failed to Read Sector 2153120 - Reason: L-EC Uncorrectable Error

(all sectors between 2153120 and 2158639 failed) (removed to save forum space)

W 00:19:44 Failed to Read Sector 2158639 - Reason: L-EC Uncorrectable Error
I 00:26:00 Exporting Graph Data...
I 00:26:00 Graph Data File: C:\Users\BRETT\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_MONDAY-NOVEMBER-14-2011_10-10_PM_MBIPG101-R10-65_2.4x.ibg
I 00:26:00 Export Successfully Completed!
I 00:26:00 Operation Successfully Completed! - Duration: 01:46:04
I 00:26:00 Average Verify Rate: 1,341 KB/s (1.0x) - Maximum Verify Rate: 16,758 KB/s (12.1x)

[showstopper]

im having a problem with imgburn, getting a I/O error while its verifying sectors.

Probably your media. What is that disk memorex?

This post has been edited by showstopper: Nov 15 2011, 03:09 PM

[xcapeartist]

Probably your media. What is that disk memorex?

Yes memorex it is, same spindle I used to burn the last 20 or so games before the may update unflashed my drive. Now I'm reflashed and trying to caught up on this new burning process my mod guy is telling me about.

Got Lt2.0
Lite On iHAS424-98B
iXtreme burner max
Followed the tut to flash the burner
Folder GL1A
tried imgburn with-
calculated layerbreak @ 2.4 with opc off
Calculated layerbreak @ 4x with opc on
User specified 1913760 @2.4 with opc off
(was told the layerbreak was set automatically now but ran the finished disc through abgx360 and it said "layerbreak for this dvd was reported as 2133520 (1913760 expected) so I tryed it with that one)