Bricked Lite-On? Read Here First Before Posting, JungleFlasher can't open .bin files? No COM Ports in JungleFlasher Options

[deilzfcjk]

didnt need a paddle just my wit and inginueity < (i think it is spelt like that)

problem solved after many hours of hard graft and help from many other people on this forum
!!!!THANKS GUYS N GALS YOU KNOW WHO U ARE!!!!

What did you do to rectify?

This post has been edited by deilzfcjk: Jan 28 2009, 12:33 PM

[headonism]

because i had the original firmware all i did was use Jflaher to erase all firmiware in windows then used Jflasher to the creat the dummy file this helped me create the ixreme 1.5 like normal i did all this in xp not dos, using the USB option once. so then all i had todo was make sure that the keys were right, then follow normal line using Jflasher..... as this was my first attempt it tookj me a long time to figure out how to right a wrong thati did earlier

thamks to all that helped me with this problem

[FilthySeabass]

One reason I have seen for the com port not pulling up is if you dont have the drive and usb hooked up before you start JungleFlasher. I hookup and setup the drive prior to starting JF and all my settings stay the same. Not that its hard to type in COM 3 but one easier step. Thanks for the original post Bong.

[brandogg]

I just want to say thanks for these awesome tips. For some reason iprep refused to see my friend's LiteOn CFW, so I used l-o-eras.exe and dosflash, and had it working with seconds. Awesome thread!

[dalton4life]

I'm using a CK3 Lite with a VIA 6421 card and have done a few Lite-ons no problem, but the last one locked up my PC on me at the erase. This thread helped out a bunch. Thanks!

[sw45]

I have tried quite a few times using the dos method in this post and using jungleflash, etc. I got the identify, inquiry, and key files using a maximus but don't have a dummy.bin. My computer froze when I started the erase process with jungleflash. Is the drive junk without the dummy.bin file?

I've tried making a dummy.bin but it doesn't work. After writing the image to the drive and putting it back in the xbox it won't read any discs. It opens and closes but won't read. I think my problem is creating the dummy.bin.

If this drive is junk is it possible to spoof another drive (ms28) since I have the key?

Thanks

[sw45]

can't figure out how to edit so I'll add this.

I read a ton more today and it seems I don't need the serial for the drive to work and my lite-on not reading discs is a key issue. I tried spoofing the lite-on to a ms28 and the ms28 works fine so it appears my key.bin is correct. What else should I try to get the lite-on to work?

[flash360]

Your dummy bin is made with firmtool using the 3 files you have already dumped It is not a fourth file you need to dump

[sw45]

I created the dummy file as well as adding the missing serial info from the labels inside the drive. I still am running the spoofed ms28 since I could not get the lite-on working. I tried flashing in dos, windows, with via ata card.

Since the ms28 is working doesn't that mean the key is correct thus the lite-on flashed with the key and ixtreme should work? I'll just leave ms28 in until I have a reason to change it then worry about it but it is too bad I can't use original.

[renski26]

Does the drive show in bios for anyone else? I'm having the same trouble, except my pc wasn't freezing when booting with the lite-on drive. The drive isn't recognised at all for me

[DoomSayerSantos]

Does the drive show in bios for anyone else? I'm having the same trouble, except my pc wasn't freezing when booting with the lite-on drive. The drive isn't recognised at all for me

I can relate bro.
I tried every guide on this and other forums.
My lite-on is still bricked.
l-o-eras , dosflash , dosflash32 , jungleflasher etc.
Nothing picks up my lite-on anymore.
If anyone got a fresh idea please give me a shout.

[FuzzyTattooedBear]

God.
U

F
V
C
K
I
N
G

R > U L E >

[fozzieb]

ok i have a problem with my lite-on,

i done this late at nght so i may of made mistake

I used jungle flasher and extracted the key, it created the 4 files and saved them to my pc.

i used the dummy.bin to patch the ixtreme 1.5 firmware, looked ok

I then tried to erase the drive but it crashed half way through (intel sata chipset)

I then booted to dos, tried l-o-erase but no mater what i can not get it to return correct code to say it is erased.

I tried dosflash, it sees the drive, used liteon erase, looked good

I then used tosflsh to write the liteon_cfw.bin to drive, looked ok

put drive back in xbox, turn it on and i get an E66 error, contact customer support.

Any ideas or thought on how to fix?

Cheers very much,
Steven

[Racing.Ray]

I have the VIA 6421 card that I used under DOS to successfully flash Samsung and BenQ drives. But now with a Lite-On, I have to use Windows, but I only have Vistax64 installed. How can I still get my key (without PortIO32) and hack/flash my drive?

Thanks!

[BoNg420]

I have the VIA 6421 card that I used under DOS to successfully flash Samsung and BenQ drives. But now with a Lite-On, I have to use Windows, but I only have Vistax64 installed. How can I still get my key (without PortIO32) and hack/flash my drive?

Thanks!

You don't.

You need 32 bit windows.