Blackcat Usb Jtag Tool? - Scenyx Entertainment Community

Rules

Blackcat Usb Jtag Tool?

xflasher101	Jan 12 2011, 03:58 AM Post #1
X-S Enthusiast Group: Members Posts: 2 Joined: 12-May 09 Member No.: 411563	Hey guys, I purchased a Black Cat usb and was wondering if I could use it as a xbox 360 jtag tool. I got a few hits with the almighty goggle but nothing concrete. What I really want is a diagram of some sort. Thanks for sharing guys.

Replies

koevoet	Nov 10 2011, 05:37 PM Post #2
X-S Enthusiast Group: Members Posts: 5 Joined: 8-February 08 Member No.: 372723	This is the layout for the BCUSB to NAND-SPI. http://imageshack.us/photo/my-images/406/bcusbnand.jpg/

foldor	Nov 15 2011, 01:41 AM Post #3
X-S Young Member Group: Members Posts: 41 Joined: 11-June 06 Member No.: 285669	QUOTE(koevoet @ Nov 10 2011, 12:37 PM) This is the layout for the BCUSB to NAND-SPI. http://imageshack.us/photo/my-images/406/bcusbnand.jpg/ Thank you so much for this koevoet. I just want to clarify things before I go and wire up my console. I don't need any resistors or diodes do I? Should it be in 3.3v or 5v mode? You marked ground on the diagram, but didn't specify where to put it. Is Blackcat USB version 1.7 ok? Thanks again.

Technitian3	Nov 15 2011, 08:51 AM Post #4
X-S X-perience Group: Members Posts: 333 Joined: 14-May 05 From: Mission, B.C. Member No.: 221054 Xbox Version: v1.6 360 version: v3.0 (falcon)	QUOTE(foldor @ Nov 14 2011, 04:41 PM) Thank you so much for this koevoet. I just want to clarify things before I go and wire up my console. I don't need any resistors or diodes do I? Should it be in 3.3v or 5v mode? You marked ground on the diagram, but didn't specify where to put it. Is Blackcat USB version 1.7 ok? Thanks again. 1- no 2- 3.3v 3- look harder at the diagram, specifically the pin numbering 4- if this is refering to a hardware revision it shouldn't matter

foldor	Nov 15 2011, 06:57 PM Post #5
X-S Young Member Group: Members Posts: 41 Joined: 11-June 06 Member No.: 285669	QUOTE(Technitian3 @ Nov 15 2011, 03:51 AM) 1- no 2- 3.3v 3- look harder at the diagram, specifically the pin numbering 4- if this is refering to a hardware revision it shouldn't matter Ok you're right. Sorry, I looked at the diagram but got confused by the colors over the numbers. Ground is indeed on there. Everything else looks good, so I should be testing this tonight then

Posts in this topic

xflasher101 Blackcat Usb Jtag Tool? Jan 12 2011, 03:58 AM

blackopsftw Same question as above! Oct 23 2011, 08:04 PM

tomsawyer2k5 The thing is that it can work because the specs lo... Oct 29 2011, 08:18 AM

koevoet The BlackcatUSB is actually now capable of reading... Nov 5 2011, 11:37 AM

kornwood sweet now what would the wiring diagram be i cant... Nov 10 2011, 09:24 AM

koevoet This is the layout for the BCUSB to NAND-SPI. htt... Nov 10 2011, 05:37 PM

foldor This is the layout for the BCUSB to NAND-SPI. [u... Nov 15 2011, 01:41 AM

Technitian3 Thank you so much for this koevoet. I just want t... Nov 15 2011, 08:51 AM

foldor 1- no 2- 3.3v 3- look harder at the diagram, spec... Nov 15 2011, 06:57 PM

kornwood oh sweet thank you koevoet Nov 11 2011, 04:05 AM

foldor Ok, it looks like it worked! I was able tin in... Nov 16 2011, 02:40 AM

mbg19 I got it to work with the 1.7 version. Successfull... Nov 30 2011, 11:58 PM

koevoet You use the same points to read/write to the nand... Dec 1 2011, 08:13 PM

kornwood can i also use the blackcat for the matrix glitche... Dec 2 2011, 02:17 AM

koevoet can i also use the blackcat for the matrix glitch... Apr 1 2012, 05:58 PM

koevoet No the BCUSB can not program the CPLD as of yet. Dec 2 2011, 03:30 PM

keiiferrer is point 4 (kiosk) not used? it is marked with a c... Jan 7 2012, 11:42 AM

braza Hi. I need layout to program Xilinx with Blackcat... Apr 26 2012, 06:25 PM

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Time is now: 19th June 2013 - 11:58 PM

Licensed to: Scenyx