Disk Swapper v1.1 DashLaunch Plugin Options

[cory1492]

IIRC... well no need since it's in the sample

CODE

; title ID is used for ini category (can be found in fsd, with xextool, the folder name built by iso2god/nxe install)
; use only numbers and small letters here
; only disks listed in the correct titleid category will be parsed from this ini
[454108df]

>>> use only numbers and small letters here <<<
So, this should work, with one tiny change

CODE

; L.A. Noire
[5454086c]
disk1 = Hdd:\Content\0000000000000000\5454086C\00007000\D29C417A095AAB673BF5
disk2 = Hdd:\Content\0000000000000000\5454086C\00007000\31166B60CF4D89293E1F
disk3 = Hdd:\Content\0000000000000000\5454086C\00007000\0EC6A58DDE77D05848D9

This post has been edited by cory1492: May 19 2011, 02:19 PM

[Xyrexus]

My Mass Effect 2 isn't swapping discs with this, I'm on Dash 12611 with Dashlaunch 2.21.

; this ini has the same rules as launch.ini and must be placed on the root of a device
; paths are determined the same way (Usb/Hdd/etc) see dash launch sample ini for more info

; title ID is used for ini category (can be found in fsd, with xextool, the folder name built by iso2god/nxe install)
; use only numbers and small letters here
; only disks listed in the correct titleid category will be parsed from this ini
[454108df]
; dead space 2
; paths for GOD games must point at the root CON descriptor, and NOT end in a \
disk1 = Hdd:\Content\0000000000000000\454108DF\00007000\831BBD71B701B42512FF
disk2 = Hdd:\Content\0000000000000000\454108DF\00007000\B8605B3BAFB748ACD08A
[5454086c]
; LA Noire
disk1 = Hdd:\Content\0000000000000000\5454086C\00007000\D29C417A095AAB673BF5
disk2 = Hdd:\Content\0000000000000000\5454086C\00007000\31166B60CF4D89293E1F
disk3 = Hdd:\Content\0000000000000000\5454086C\00007000\0EC6A58DDE77D05848D9
[454108ce]
; Mass Effect 2
disk1 = Hdd:\Content\0000000000000000\454108CE\00007000\2AB71BD89DC58E8FB82F
disk2 = Hdd:\Content\0000000000000000\454108CE\00007000\651DFCA81463C5F0E6B4

I'm getting around to playing the other games to test them, but with ME2 I have a savefile right before you need to swap back to disc 1, and it's not doing anything.

[syntaxerror329]

I just tried setting this up for my first time and I can't even get dashlaunch to install the swap.xex into flash.

Here is what i have done so far.

This is a Xenon running freeboot 13599 if that matters. I am using this with dash_launch_v2.23b

I have edited the info_launch.ini for dashlaunch plugins like in the example

CODE

[Plugins]
plugin1 = Usb:\swap.xex
plugin2 =
plugin3 =
plugin4 =
plugin5 =

I have swap.xex and multi.ini on the root of my usb stick.

When i run the dashlauch installer it just does not seem to see swap.xex and I check in flash and i don't see swap.xex in there.

So first off am i correct that when this is properly installed i should be able to browse flash and see swap.xex?

Any idea's where i am going wrong? It must be something really simple.

[-Gadget-]

whats the best way to check that its working ??

[-Gadget-]

its ok all sorted now !
best way i found was with battle field 3
select campaign, then medium/easy etc, it asks for disc 2 if it dont work !
if its working just kicks striaght into campaign