Group: Members
Posts: 5749
Joined: 27-August 08
From: UK
Member No.: 388964
Xbox Version: v1.4
360 version: v4.0 (jasper)
Excellent. Error 13 is great - just burn HeXEn to DVD-R at 4x or slower and it should boot quite happily. From there use Option 3.5.2 to rebuild your C partition.
Group: Members
Posts: 13
Joined: 7-August 11
Member No.: 456099
It didnt work... I'm confused.
I burned HeXen with IMGburn using on a DVD-R PLATINUM disk with speed 2X. First i burned it on my laptop and also tried it on my desktop. They both didnt work. Also burned Auto Installer Deluxe 4.0 same story, it freezes at boot screen.
I also burned Xbox Ultimate boot disk, but this one did boot. I saw a blue screen: UnleashX detected a new harddisk. Want to format it. And i just agreed. Now it says formatting Drive C:// but i dont realy have the feeling that something is actually happening... I dont hear my HD making noises...
Group: Members
Posts: 13
Joined: 7-August 11
Member No.: 456099
I allready tried hotswapping using XboxHDmaker and recovery tool but it shows that the HDD is locked. So options 1, 2, 3, 4, 5, were disabled. And 6, 7, 8, were enabled.
Group: Members
Posts: 5749
Joined: 27-August 08
From: UK
Member No.: 388964
Xbox Version: v1.4
360 version: v4.0 (jasper)
That simply means that you aren't hotswapping properly. You have to get the timing right, and with some PCs you need to do things like disabling disk detection in the BIS, hotswappng after POST, etc.
Your only other alternatives are to build / buy an eeprom reader, or fit a chip.
Group: Members
Posts: 13
Joined: 7-August 11
Member No.: 456099
Okay my xbox runs again. What i did was,
I simply put an 40Gb HDD and insterted Xbox ultimate disk formatted it and installed everything. Now i can use my Xbox and i have 40 GB. Could it be that the original HDD is damaged?