Aladdin Advance 32, What Bios? Options

[Difio]

I've recently bought an used Xbox with a Aladdin Advance 32. The seller said that probably the chip was flashed with an evox bios (the xbox has not arrived, yet...so i can't check), but I think that is an old one. My question was: what is the best bios that I can flash? I'm completely new to the world of xbox 1 so I really don't know.

I want to install on the Xbox XBMC as dashboard...I don't know if this is important in the choice of bios.

This post has been edited by Difio: Aug 21 2011, 02:21 PM

[Difio]

ok, i solved the problem buying another xbox for few euros, it works so i installed the aladdin chips and when i turn on the xbox, there is no way to turn on the chip.

I get no FRAG, black screen or something else, the xbox just boot normally the microsoft dash. I've checked all the solder and they are ok.

The only strange thing i saw is the eject LED: when i press quickly the power button the led at the beginning is red, then became green (and the ms dashboard loads perfectly), and when i press the button for 1 second at the beginning the led is red, then came orange. If i'am not wrong, this is normal, but the fact is that as soon as i leave the button after 1 second the led became green booting the ms dashbard without problem.

I really don't understand, the LPC solder is ok because if they weren't the xbox had to FRAG...

Any of you had experienced a situation like that? Could be a problem of the chip (may be it fried with the old xbox)? I had thought also to an incompatibility between the xbox (a 1.4) and the chips (or better, the old bios)...can somebody help me? Thanks..

This post has been edited by Difio: Oct 10 2011, 12:18 AM