xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Errors Dumping Nand Using Matrix Nand Programmer
bullbaiter
post Oct 2 2011, 01:12 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 11
Joined: 10-August 04
Member No.: 137649
Trying to dump the nand from a jasper and am getting some errors :

C:\Nandpro20e>nandpro usb: -r64 asper1.bin
NandPro v2.0e by Tiros

Looking for usb interface device
Flash Config: 0x008A3020
Block Size: 128KB Block Limits: 0x000000..0x000FFF
File: jasper1.bin
Reading
Error: 250 reading block 50
Error: 250 reading block 60
Error: 204 reading block 40F
0FFF

I've read some say the 250's aren't a big deal.. but couldn't find alot on the 204 error...

I dumped it 10 times and each one gave the same erros and was the same size. Nandcompare didn't find any differents in any of them... the matrix nand programmer i'm using is soldered with 30 gauge solid wire and the lengths of the wire are about 1" to 2"...

Not sure if it be ok to patch it and upload it back or if it needs repaired... or if it can be repaired...

tryin to do the reset glitch with both matrix products.

This post has been edited by bullbaiter: Oct 2 2011, 01:13 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Morning Call
post Oct 2 2011, 09:03 AM
Post #2


X-S Senior Member
**

Group: Members
Posts: 229
Joined: 7-September 09
Member No.: 418663
if its only a couple errors and its consistently the same blocks then odds are the programmer is working fine.

none of those blocks are affected by the reset glitch hack though.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 19th June 2013 - 03:47 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx