The Final Tutorial For St.db Audio Exploit, Getting Evolution X and Loader FX to run Options

[lp2000]

NOTE the exploit ST.DB is seperate from the font exploits.. I didn't mention about the font exploits in the tutorial. so dont use the font exploits.. only the audio exploit!

Firstly you must do this.. thanks to Adso58 for figuring the out the problem of the audio exploit ONLY running linux.xbe

Adso58 did this first:
"I managed to get the audio exploit to run whatever .xbe, I explain it:

First you must install the exploit without any change, insert a Audio CD, execute linux.xbe, etc.

Now, you need to transfer the ST.DB that you have copied to the XBox before, to the PC (the file should have changed).

With this file, replace the following bytes (starting at position 0xFF):

"05 14 00 00 00 89 85 72 01 00 00"

with these

"81 76 FF 14 01 00 10 90 90 90 90"

Copy this modified file to the XBox (yes, again), and overwrite the old file.

Now, you can sign any .xbe with the habibi key using "xbedump file.xbe -habibi" and copy out.xbe as linux.xbe in E: and the .xbe will run.

And I must recognize that the guy that made the audio exploit is very clever, he put some nice protections to avoid running other .xbe than linux.xbe

This method was tested on a XBox v1.0, with kernel 4034 and dashboard 4920, I don't know if it will work in other XBoxes"

A Big THANKS to Adso58 yet again.

Tutorial:

For the Following Methods you need:
1)The Audio Exploit
2)Either 007, mech assault save hacks
3)Either A Copy Of EvoX or !Loader v1.0 FX (which ever one you choose)

-----------------------------------------------------------------------------

How to make the Audio Exploit work for Evo X

now.. to do this .. its REALLY easy..

step one:
find a way to communicate with your xbox (i.e. like the 007, mech assault saves already loaded with evo x)

step two:
now since you have your network setup with the box and the pc all you need now is a copy of the audio exploit (for more information about where to put the audio exploit read the readme file that came with it... it will tell you where to put it).. put the ST.DB on the xbox WITHOUT the linux.xbe file in the E partition (this will be explained later)

step three:
get a copy of xbe dump (i will assume that you would already know how to use this software) and put the command line:

xbedump default.xbe -audio

(the default.xbe file that you will be using will be the evo x .xbe file)

when that is done the default.xbe file will be named again as out.xbe .. rename out.xbe into linux.xbe.

step four:
now take the "new" linux.xbe file and put it in the E partition also add all the files evo x came with (as linux.xbe as its excutable).

step five:
reboot your xbox and load up the audio exploit.. voila.. evo x for your unmodded box!

p.s : i got LOADER.v1.00-FX.XBOX-COMPLEX working with this exploit too.. i will be posting it later.. since its the morning and i have stuff to do.

dont flame me if you get this shit all wrong.. FOLLOW the instructions.. if your stuck.. read the read me files and such.. oh yes make sure you know how to use dos for the xbe dump prog.

-----------------------------------------------------------------------------

How to get LOADER v.1.0 FX to work with the audio exploit.

now.. to do this .. its REALLY easy..

step one:
find a way to communicate with your xbox (i.e. like the 007, mech assault saves already loaded with evo x)

step two:
now since you have your network setup with the box and the pc all you need now is a copy of the audio exploit (for more information about where to put the audio exploit read the readme file that came with it... it will tell you where to put it) put ST.DB on the xbox WITHOUT the linux.xbe file in the E partition (this will be explained later)

step three:
get a copy of xbe dump (i will assume that you would already know how to use this software) and put the command line:

xbedump default.xbe -audio

(the default.xbe file that you will be using will be the !Loader v.1.0 FX .xbe file)

when that is done the default.xbe file will be named again as out.xbe .. rename out.xbe into linux.xbe.

step four:
now take the "new" linux.xbe file and put it in the E partition
DO NOT put the !Loader Folder in the E partition (this will be explained later) ONLY put the new linux.xbe file in the e partition.

step five:
put the !Loader folder (with all of its contents) to the C partition

step six:
reboot your xbox and do the exploit.. you will see the loader load! YAY.

the good thing about the audio exploit is that it doesnt "auto load" evo x or even the loader.. you can manually enable it yourself with the exploit.

dont flame me if you get this shit all wrong.. FOLLOW the instructions.. if your stuck.. read the read me files and such.. oh yes make sure you know how to use dos for the xbe dump prog.

This post has been edited by lp2000: Aug 14 2003, 06:50 AM