Xbox 360 Slim Coax Digital Out - Scenyx Entertainment Community

Rules

Xbox 360 Slim Coax Digital Out

REDMODS	Feb 5 2012, 09:14 AM Post #1
X-S Senior Member Group: Members Posts: 173 Joined: 16-October 06 Member No.: 305613	Today I wired up a digital coax out to my slim 360 using JaredC01's diagram for the original 360. I hooked my outside (ground) to pin 27 and the inside to pin 25 (positive) and closed it back up. The digital coax does not work, but now my onboard fiber optic is not working either. Do I need a switch or something since both are present? I would really like to fix this and at least have my fiber optic back. http://forums.xbox-scene.com/index.php?showtopic=596642 This post has been edited by REDMODS: Feb 5 2012, 09:22 AM

Replies

moshbear	Apr 14 2012, 10:28 AM Post #2
X-S Young Member Group: Members Posts: 42 Joined: 16-August 10 From: Canada Member No.: 442372 Xbox Version: none 360 version: v4.0 (jasper)	Here's an example: http://mitglied.multimania.de/Promitheus/optictocoax.pdf Go to page 3. Use the SPDIF signal as input to the dual inverter-based driver, the voltage for voltage, and ground as ground. Remember that pin 14 of a 14-pin DIP is V_CC and pin 7 is GND. Parts should run you $10-ish + shipping.

Posts in this topic

REDMODS Xbox 360 Slim Coax Digital Out Feb 5 2012, 09:14 AM

moshbear You need to convert the TTL signal to a coax one. ... Apr 3 2012, 10:10 AM

moshbear Here's an example: http://mitglied.multimania.... Apr 14 2012, 10:28 AM

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Time is now: 23rd May 2013 - 07:38 AM

Licensed to: Scenyx