xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Re-jtag
sknobs
post Feb 9 2012, 10:38 PM
Post #1


X-S Young Member
*

Group: Members
Posts: 36
Joined: 29-September 02
Member No.: 4400
Hey all.

Have an older Japser with the transistor JTAG. Just went RROD 0022. I am guessing Nand corruption.
I have the Nand-X reader JTAG kit from a while back.
Should I

a-solder in the Nand-x and reflash the nand back to stock and start over
b-Install the Nand-x and jtag without removing the old one?
c- remove the three wires from the old JTAG and install the Nand-x as per the tut?

thanks!!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cRaCKwHoRe
post Feb 10 2012, 02:23 PM
Post #2


X-S Senior Member
**

Group: Members
Posts: 271
Joined: 16-December 02
Member No.: 13557
Xbox Version: unk
360 version: v5.0 (360S - trinity)
If you suspect NAND corruption then solder in the NAND-X again and read the NAND several times and run it through and see if there are any bad blocks, mismatch, etc...

If there are- do you have your original NAND file? If so, you could build a new hacked image and flash it back..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 18th May 2013 - 03:44 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx