What kind of jtag method was used?
If you used diodes or resistors it could be a bad diode/resistor.
I would try redoing the wiring anyway first. USe all new wire and diodes or however you did it..
or redo it with this method. But you have to rebuild your image. I would try to use multibuilder v.82 and choose audio_clamp wiring...if you redo it with transistor method. http://www.youtube.com/watch?v=zIbSULSdT34
If that dont resolve the 0022, reflow it. professional or with a heat gun to see if it boots afterwards..remove xclmaps, clean thermal paste off gpu/cpu, heat gun back of board for 2-3 minutes 2-3 inches away from board, let it cool, reapply thermal paste, xclamps and see if it boots...if it does..have it professional reflowned or reballed..This post has been edited by steveo1978: Feb 29 2012, 12:40 AM