Need Help With Slim Trinity And Rgh Options

[FrankDux]

Ok so I got the Xbox360 Slim (Trinity) installed the QSB and the CoolRunner-II connected it to the Nand-X v3 and read my nand several times.

Each time I read it i get :


Trinity
Reading Nand to F:\16gb usb\111-JTAG TOOLS\111-J-Runner v01 (259) Core Pack\J-Runner\output\nanddump1.bin
Arm Version: 3
Flash Config: 0x00023010
Reading Nand
Error: 250 reading block 178
Done!


its always the same block 178, I tried a few other programs and same block again.. I have re-soldered everything aswell.

but my big problem is when I select my nand files and that when I go to create the ECC file.. this is what I get

Initializing Nand..
*found flash image, unpacking...
ECC'ed - will unecc.
UnECC'ed
*found decrypted CD
*found XeLL binary, must be linked to 0x1c000000
*we found the following parts:
SMC: 3.1
CB_A: 9230
CB_C: 9230
CD (image): 9230
CD (decrypted): 8453
*this image will be valid *only* for: trinity (slim)
*patching SMC...
Patching Trinity version 3.1 SMC at offset 0x13B3

* XOR HACK NEEDED FOR CB 9230
* patching CB_9188..

(*** and then the J-Runner program crashes ***)


Im not sure whats going on...

any one got any suggestions

Thanks

This post has been edited by FrankDux: Mar 6 2012, 03:48 AM

[FrankDux]

I have a small update...

now when I do a fresh nand read with J-Runner and select Create ECC it seems to work with out crashing.. here is the logs


===================================================
Monday, March 05, 2012 8:38:38 PM



No Updates Found


Checking Files
Finished Checking Files
Can not continue
Trinity
Reading Nand to F:\16gb usb\111-JTAG TOOLS\111-J-Runner v01 (259) Core Pack\J-Runner\output\nanddump1.bin
Arm Version: 3
Flash Config: 0x00023010
Reading Nand
Error: 250 reading block 178
Done!

Initializing Nand..
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 3.1
CB_A: 9230
CB_B: 9230
CD (image): 9230
CD (decrypted): 8453
* this image will be valid *only* for: trinity (slim)
* patching SMC...
Patching Trinity version 3.1 SMC at offset 0x13B3

* XOR HACK NEEDED FOR CB 9230
* patching CB_B 9188...
patchset for 9188 found, 4 patch(es)
* Applying XOR Hack to CB_B 9230
*** Re-encrypting CB_B with xor keystream
*** Fixing entrypoint

* constructing new image...
* base size: 70000
* Replacing CB_A 9230 with 9188
* encrypting CB...
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x9ABF (0x1AC0 bytes) CB_A 9230
0x9AC0..0x114EF (0x7A30 bytes) CB_B 9188
0x114F0..0x174EF (0x6000 bytes) CD 8453
0x174F0..0xBFFFF (0xA8B10 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...

100%
------------- Written into output\image_00000000.ecc


why is this working this way, but if I open J-Runner and select my nand files then click on Create ECC it crashes ????