Amazemod V2 Wiring Pls Options

[BytePir8]

Hi all
can anyone point me to the wiring diagrams for the amazemod v2, looking @ putting it in a jasper sb? pls
seems hard to find diagram/pin out for this glitcher

cheers
Byte

Got it guys lol amaze me lol

This post has been edited by BytePir8: Mar 19 2012, 07:31 PM

[Definitely Wapner]

Google works wonders...

http://www.amazemod.com/

[Jumpy_Beans]

Wow, I didn't even know this glitcher existed, just looked it up and it seems like you don't have to program it and it's cheaper than most out there. Especially if you need to move it from console to console.

[BytePir8]

Wow, I didn't even know this glitcher existed, just looked it up and it seems like you don't have to program it and it's cheaper than most out there. Especially if you need to move it from console to console.

I wouldn't bother, have installed it in a jasper and trinity, it never glitched once!!
Not being able to program it you can't alter/reflash the bloody thing.
this glitcher in 1 word , SH*TE

[jeffrey1790]

you know its bad when they cant even spell the word glitcher

http://www.amazemod.com/images/banner.jpg

[Jumpy_Beans]

I wouldn't bother, have installed it in a jasper and trinity, it never glitched once!!
Not being able to program it you can't alter/reflash the bloody thing.
this glitcher in 1 word , SH*TE

you know its bad when they cant even spell the word glitcher

http://www.amazemod.com/images/banner.jpg

Lol thanks for the heads up! They also can't spell the word 'fat'.

[relaxxx]

Being the thrifty guy I am, I couldn't resist trying a $10 5in1 cheapo glitch chip. I just got one so far and it worked in both my Trinity and Jasper board. Glitching on Jasper was much faster than the Trinity but for $10 bucks this thing does the job. I'ts possible to get a few duds I'm sure. I ordered 3 more to try.

[relaxxx]

I got another one, not glitching slim trinity. I guess the first one was a fluke. These will glitch Jaspers very nicely but there is an issue with slims. Seems one of the capacitors needs to be changed. I'll be playing around with it to see if I can get it glitching.

http://www.consoleopen.com/forum/hack-xbox...im-console.html

[relaxxx]

Good success today. I got another trinity working with this amazemod, top coil wiring like the picture in the link above. I was going to test some caps but my meter is broken. Using original SMD cap but it's now wired on little 1cm legs to pad A and GND. I started with about 45-50cm wire, no glitch, cut about 5cm off and glitched right away. Now with the DVD and HD installed I'm consistently getting boots within 5-15 seconds.

I gotta say, I'm liking this chip, trinity's are a little fussy but on Jaspers they're booting nearly instantly, almost all the time. I had an X360glitch chip on a jasper that was absolutely terrible, replaced it with amazemod and no problems at all. The LED is handy too. I was going to try a falcon but I have to wait till I get some more.

This post has been edited by relaxxx: Jun 14 2012, 12:23 AM

[ellena]

... Using original SMD cap but it's now wired on little 1cm legs to pad A and GND...

Can you explain a little more on that part about the SMD cap? Do you mean you remove a SMD cap and wired it between pad A & GND? Which SMD cap?

Have you tested more Amazemod on Slim? Price is very attractive.

This post has been edited by ellena: Jul 28 2012, 05:12 PM

[relaxxx]

See link above, scroll down to pic.
I do not recommend Amazemod on Slim. Works fine on Falcon and Jasper but too many issues with Slim. I've gotten it to work but too much fiddling around to be worthwhile, DX had CR rev B's for $3 more.

[relaxxx]

Forgot to mention, the last trinity I booted Amazemod with, I had to use 440pf (2X 220pf in parallel). The wire lengths and cap values needed seem to be all over the place for booting slims.