xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Xbox Boots Up Then Shuts Down In 5 Minutes
Buffalobills
post Apr 8 2012, 04:47 AM
Post #1


X-S Young Member
*

Group: Members
Posts: 33
Joined: 24-December 03
Member No.: 84995
I just did a Reflow on my Xbox. It now does boot up and after a couple minutes it will shutdown and the center light stays on. Anyone have any clue what is going on?
Thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
AirCap
post Apr 16 2012, 11:29 AM
Post #2


X-S Enthusiast


Group: Members
Posts: 4
Joined: 6-April 12
From: South Africa
Member No.: 463198
Xbox Version: none
360 version: v3.0 (falcon)
Do the fans still run, once it has shut down?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
iwanttheagrocrag
post Apr 18 2012, 02:46 AM
Post #3


X-S Expert
***

Group: Members
Posts: 544
Joined: 14-July 03
From: Detroit, Michigan
Member No.: 49933
Xbox Version: v1.0
360 version: v5.0 (360S - trinity)
Yea that seems like you accidentally didn't plug the fan in. IDK... sucks either way : / phats are basically junk nowadays.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Buffalobills
post Apr 19 2012, 03:27 AM
Post #4


X-S Young Member
*

Group: Members
Posts: 33
Joined: 24-December 03
Member No.: 84995
Fans turn off after it does.Then the 2 lights come up so its overheating. I'm just going to flash my slim and say the hell with it
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
canyonnehastings
post Apr 28 2012, 08:03 PM
Post #5


X-S Member
*

Group: Members
Posts: 143
Joined: 3-April 08
Member No.: 377655
QUOTE(Buffalobills @ Apr 18 2012, 09:27 PM) *

Fans turn off after it does.Then the 2 lights come up so its overheating. I'm just going to flash my slim and say the hell with it


If you reflowed it, you took the heatsinks off. Anytime you remove them theres the chance of them not reseating properly when you put it back together. You need a VERY thin layer of thermal paste and the heatsinks should sit evenly and touch all of the chip. You can slightly bend your x-clamps for them to hold the sinks on tighter.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Haygar
post Apr 29 2012, 12:51 AM
Post #6


X-S X-perience
**

Group: Members
Posts: 471
Joined: 19-November 06
From: Australia
Member No.: 312258
Xbox Version: v1.1
360 version: v3.0 (falcon)
QUOTE(iwanttheagrocrag @ Apr 18 2012, 11:46 AM) *

: / phats are basically junk nowadays.

Yes, all of us with perfectly working phats should go and hurl them into the bin. Microsoft deserves the extra sales. tongue.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
relaxxx
post Apr 30 2012, 07:52 PM
Post #7


X-S Genius
****

Group: Members
Posts: 895
Joined: 26-April 05
Member No.: 216729
Yeah, meanwhile some slims are already reaching end of life with E82 errors and such. My Falcon JTAG is Fan&Shroud modded with average GPU temp @ 42C. Is that junk? Because I guarantee it will outlast 10 stock 360 slims that run around 65-70C!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rastaman108037
post May 1 2012, 07:03 AM
Post #8


X-S Senior Member
**

Group: Members
Posts: 278
Joined: 25-February 07
Member No.: 331280
Xbox Version: v1.6
360 version: v4.0 (jasper)
QUOTE(iwanttheagrocrag @ Apr 17 2012, 09:46 PM) *

Yea that seems like you accidentally didn't plug the fan in. IDK... sucks either way : / Xenons and Zephyrs are basically junk nowadays.


Fixed that for you.

If OP reflowed a Falcon or a Jasper it likely did not need to be. Some...unintelligent people...try to do the x-clamp mod on Falcons and up, which does not help at all and probably causes more damage than good. Falcons and especially Jaspers have a very low failure rate. If OP had to reflow and used a heatgun, oven, or anything but a several thousand dollar reflow station, he obviously caused some damage. These poor man's methods were never perfect and many people ended up with dead boxes for some reason or another. You probably fried something on the board.

Slims are a bitch to take apart. Phats take like 30 seconds.

Edit, to above^: My Falcon JTAG has a 3.5" HDD mod in it, which required soldering to a Mosfet and all kinds of scary wiring and it works perfectly. Has for four years almost. Falcons run just beautifully. Zephyrs and Xenons do not.

Edit Edit: I have never seen an E82 and I've handled dozens of slims. It is a very isolated issue and is not common. It's well within industry standards for failure, unlike the first gen 360s.

This post has been edited by rastaman108037: May 1 2012, 07:09 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rilski
post May 2 2012, 04:42 AM
Post #9


X-S Young Member
*

Group: Members
Posts: 47
Joined: 16-October 08
Member No.: 392643
Damn the Xenon's!!!!!!!11111
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 19th May 2013 - 02:18 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx