Major Headache With A 0110 Options

[wilgo45]

Generally when working on a 360 with the error code of 0110, I reball the Gpu and everything is good from there.

Have a repair now, that has been a major headache. Error Code 0110

I have reballed the Gpu and the 4 Ram chips on top. Still 0110. I even reflowed the Gpu reball work. Also I am using a Dark IR machine.

Granted there are 4 more Ram chips on the bottom. But I am interested in hearing ideas

The source of trouble comes from this. The owner did a fix on a 3 rrod. Worked for two weeks, then down. He used really flat headed screws for his x-clamp replacement. And did not drill out for space to float. So he put tremendous curve and pressure on the motherboard from 8 points

So - looking for ideas. Where else should I focus ?

[MadMaxGR]

I had one case in the past that it was 0110 coming from the RAm chips under the board. It worth to reflow them. If that doesn't work, then start looking for some loose or lost tiny components like small surface mount capacitors.

[wilgo45]

I had one case in the past that it was 0110 coming from the RAm chips under the board. It worth to reflow them. If that doesn't work, then start looking for some loose or lost tiny components like small surface mount capacitors.

Haven't spotted any missing surface mount devices yet

I did remove the bottom Ram chips. The code went from 0110 to 0022

I will redo my reball on the Gpu. Then I might reball the Cpu .... Or do you think I should go straight to the Cpu ??

[MadMaxGR]

Haven't spotted any missing surface mount devices yet

I did remove the bottom Ram chips. The code went from 0110 to 0022

I will redo my reball on the Gpu. Then I might reball the Cpu .... Or do you think I should go straight to the Cpu ??

I have just noticed.. You REMOVED the RAM chips????
If they are removed the 0021 and 0022 errors make sence!
All RAM chips must be in place and make proper contact, to boot up.