Group: Members
Posts: 11
Joined: 9-April 08
Member No.: 378183
Hi Guys I have 2 problems,
The first is simply why wont my slim recognise any hard drive I put in it, I have a toshiba and a seagate both have been formatted in ntfs,fat32 and hfs+ but it will not find it. I have come across so many conflicting ideas and info I am totally lost. So what drive and format do I need please people.
The Second is I have a slim 4gb I took in for repair, (some kid totally mangled the av socket) I have removed the socket and pins from the motherboard just leaving the Hdmi and the console turns on and runs for about 10 minutes then red lights. I have replaced the thermal compound twice just to be sure but other than that I can't see what the problem would be. any ideas would be great on this one.
Group: Members
Posts: 11
Joined: 9-April 08
Member No.: 378183
QUOTE(MadMaxGR @ Apr 18 2012, 02:00 PM)
You can't remove sockets just like that... please post some photos on the effected area to have clearer view of your issue.
I'll post them tomorrow if I get time, I had to remove it because although it had a picture from the hdmi there was no sound because the pins were all touching. It doesnt have a problem with anything now ie picture or sound so I don't think that is causing the issue but you never know.
Group: Members
Posts: 11
Joined: 9-April 08
Member No.: 378183
Ok I have just used hex editor and replaced the hddss.bin on my WD drive my next problem is I cant get to the sata ports on my main pc and my little shed pc isn't recognising anything in the 2 sata ports that has, Is there any other option I can use other than hddhackr to format the drive so the xbox can see it.
Group: Members
Posts: 2791
Joined: 26-May 08
From: Cyprus
Member No.: 381970
Xbox Version: v1.6
360 version: v4.0 (jasper)
QUOTE(olliedog12000 @ Apr 19 2012, 11:41 PM)
Ok I have just used hex editor and replaced the hddss.bin on my WD drive my next problem is I cant get to the sata ports on my main pc and my little shed pc isn't recognising anything in the 2 sata ports that has, Is there any other option I can use other than hddhackr to format the drive so the xbox can see it.
Nope, only hddhckr can enable a non-MS-approved HDD to work on your XBOX.