xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Benq Found By Dosflash But Nowhere Else
o0LuKa0o
post Apr 28 2012, 03:00 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 7
Joined: 31-October 10
From: North Port, FL
Member No.: 445516
Xbox Version: v1.0
360 version: v1 (xenon)
So I've purchased a spare BenQ drive and I am attempting to get it recognized in Windows 7, JungleFlasher and XBC with no luck. However, according to DOSFlash it is a BenQ, it read (and wrote) my stock firmware. JungleFlasher recognized the read firmware as stock BenQ firmware with DVDKey in tow, spoofed key to 0800 v.3 firmware, wrote 0800 firmware on to drive using DOSFLash. I'm in test mode Win7 64bit and have F8'd at boot up to bypass driver signature.

What is going on?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
CarpeDiem0
post Apr 28 2012, 03:03 AM
Post #2


X-S Young Member
*

Group: Members
Posts: 44
Joined: 22-March 12
Member No.: 462882
Xbox Version: v1.6d
360 version: v3.0 (falcon)
Did you actually verify that PortIO is running at JF startup?

also

1. Ensure ACHI and RAID are disabled in BIOS. Native IDE is ok.
2. Use Primary Master SATA (usually sata1 or 0 (lowest#) port). Each port is labeled on the mobo. If your system HDD is in the lowest one, move it.
3. Ensure "Include non-IDE" is ticked, and "VIA only" is unticked in JF
4. Scroll thru your I/O ports and note the port that the drive is on
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
o0LuKa0o
post Apr 28 2012, 03:09 AM
Post #3


X-S Enthusiast


Group: Members
Posts: 7
Joined: 31-October 10
From: North Port, FL
Member No.: 445516
Xbox Version: v1.0
360 version: v1 (xenon)
QUOTE(CarpeDiem0 @ Apr 27 2012, 10:03 PM) *

Did you actually verify that PortIO is running at JF startup?

also

1. Ensure ACHI and RAID are disabled in BIOS. Native IDE is ok.
2. Use Primary Master SATA (usually sata1 or 0 (lowest#) port). Each port is labeled on the mobo. If your system HDD is in the lowest one, move it.
3. Ensure "Include non-IDE" is ticked, and "VIA only" is unticked in JF
4. Scroll thru your I/O ports and note the port that the drive is on


1. Nothing under Native or Legacy
2. Tried all 6 ports
3. Done and done
4. Nothing on I/O ports except for IDE controller device
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
CarpeDiem0
post Apr 28 2012, 04:43 AM
Post #4


X-S Young Member
*

Group: Members
Posts: 44
Joined: 22-March 12
Member No.: 462882
Xbox Version: v1.6d
360 version: v3.0 (falcon)
QUOTE
QUOTE
(CarpeDiem0 @ Apr 27 2012, 10:03 PM)

Did you actually verify that PortIO is running at JF startup?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 19th May 2013 - 02:02 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx