Getting Mixed Signals (many Different Guides And Suggestions) Need Hel, Nand-X, CoolRunner Rev B, Zephyr CB 4575, RGH 2.0. Options

[highonxbox]

I ordered a CoolRunner and got the Rev B. I already had a Nand-X from all the JTAG's I've done in the past. This is my first RGH. I thought that I had researched the project properly but I quickly learned that I had not.

I had to order the nand-x to coolrunner cable so I could update the coolrunner. After getting that I learned that my Nand-X was outdated and needed to be updated as well so I had to oder the Nand-X USB update cable and update that.

After getting all the right cables and looking at several different wiring diagrams I finished the project using jrunner only to discover that my Zephyr won't boot after flashing the ECC and turning the Coolrunner to NOR. The green light flashes but nothing comes up on the screen.

I've done lots more reading since then and now I'm really confused. I've also double checked all my soldering to make certain they are all solid. I've read that you need to perform some kind of hardware hack to the Coolrunner and then jump the cap point? I've also read that you NEVER jump the cap point. So what do I really need to do in order to use my Coolrunner Rev B with my Zephyr CB 4575 and use the RGH 2.0?

Thanks for you help.