Evolutionx, Empty Drive Options

[kwixbit]

Hi,

After i managed to get my new HDD working, i have another problem, so i open a new topic.

I did "xboxhd" to make my new upgraded hard drive, when i boot i have the EvolutionX dashboard, however the drive (all partitions) seems to be almost empty when i FTP to it (there's a Cache folder though)

However the CD i used installed UnleashX on my stock HDD, how can i have UnleashX on my new HDD now?
Is there a way to perform a clean install?

Thanks

This post has been edited by kwixbit: Jun 23 2012, 07:04 PM

[kwixbit]

I'm having some difficulties to find a download.
So meanwhile i tried to FTP UnleashX to the C: drive, but i get errors:

CODE

ommand:    CWD /C
Response:    250 CWD command successful.
Command:    TYPE I
Response:    200 Type set to IMAGE.
Command:    PORT 192,168,1,10,214,10
Response:    200 PORT command successful.
Command:    STOR Default.xbe
Response:    150 Opening BINARY mode data connection for file transfer.
Response:    450 Cannot access file.
Error:    File transfer failed after transferring 262 144 bytes in 1 second
Response:    226 Transfer Complete.
Status:    Starting upload of C:\Users\Warren\Desktop\UnleashX_0_39_0528A\Default.xbe
Status:    Retrieving directory listing...
Command:    PORT 192,168,1,10,214,11
Response:    200 PORT command successful.
Command:    LIST
Response:    150 Opening ASCII mode data connection for list.
Response:    226 Transfer complete.
Command:    PORT 192,168,1,10,214,12
Response:    200 PORT command successful.
Command:    STOR Default.xbe
Error:    Could not write to transfer socket: ECONNRESET - Connection reset by peer
Response:    150 Opening BINARY mode data connection for file transfer.
Response:    450 Cannot access file.
Error:    File transfer failed
Response:    226 Transfer Complete.
Status:    Starting upload of C:\Users\Warren\Desktop\UnleashX_0_39_0528A\Default.xbe
Status:    Retrieving directory listing...
Command:    PORT 192,168,1,10,214,13
Response:    200 PORT command successful.
Command:    LIST
Response:    150 Opening ASCII mode data connection for list.
Response:    226 Transfer complete.
Command:    PORT 192,168,1,10,214,14
Response:    200 PORT command successful.
Command:    STOR Default.xbe
Response:    150 Opening BINARY mode data connection for file transfer.
Response:    450 Cannot access file.
Error:    File transfer failed
Response:    226 Transfer Complete.

The file is accessible, the naming should be no problem and there's enough free space left.
I also get error #450 sometimes.

Any idea?