Team-Xecuter announces 'CoolRunner 3 Lite' Options

[Xbox-Scene]

Team-Xecuter announces 'CoolRunner 3 Lite' Posted by GaryOPA | August 21 08:43 EST | News Category: Xbox360

T-X back from their summer vacations! T-X has announced a new product: the 'CR3 Lite', which will take over from the discontinued CoolRunner Rev C. It looks like the Team-Xecuter staff is back from their summer vacations, and now they are back working on the new CR3 range of RGH addons. And, they've already announced a new product, the CoolRunner 3 Lite, which is aimed to take over from the now discontinued CoolRunner Rev C. Here's its official info and features: [QUOTE] There were so many inferior copies that we felt it needed a good upgrade with all of the latest fixes and tweaks (we've included the PLL_BYPASS Multicap Addon, CPU_RESET Cleaner Addon, Corona QSB Upgrade, Added an upgraded CPU_RESET UF.L Micro Connector and more) FEATURES: • Brand new design from the all new CR3 Range ! • Next-Gen RGH Circuit – Embedded All Current Fixes & Tweaks • Quality Assured – No Cheap Chinese Knocks-Offs • New RGH1 PLL_BYPASS Cleaner Switches (680pF, 150pF, 100nF, 68nF, 47nF Caps) • New RGH1 & RGH2 CPU_RESET Cleaner Switches (1k, 2k, 3.3k Resistors and 470pF, 560pF 680pF Caps) • New Corona Support – High Quality Branded 48.000Mhz Crystal (No cheap quality knock offs – gives higher performance) • New UF.L / UMCC Connector for CPU_RESET (Includes Ground – Plug In Adapter No Soldering to the CR3 Lite required) • New 50 Ohm Micro Double Shielded & Grounded CPU_RESET Cable (Only 1.53mm and up to 6Ghz passband) • New Built In ROL Option (Show Debug LED On Front Panel Ring Of Light) • Built-in Ribbon Cable Connector For DemoN (Includes CR_EN and XSVF Programming – no soldering or wires) • Enable/Disable C15 Jumper • Enable/Disable 10 Ohm Jumper • Unique design – do not confuse with other brands that have copied the public schematics • Optimized timing for each motherboard version • Easy programming via JTAG • JTAG CK3 Power Plug Included for LPT (JP4) • Power LED • Reset Cycle Debug LED • Easy Install (Includes All Wires) • Works perfectly with the world famous NANDX, J-R Programmer & DemoN • QSB Add-Ons Available • Trusted Team Xecuter Design & Warranty [/QUOTE] Stock is expected to arrive around Aug 31st (Limited stock). Official Site: New Product CR3 Lite (via) Team-Xecuter

[Intruder7s]

I am a noob in RGH and this kind of stuff ( had only been involved in some flashing ) but from the reading I have done I've gathered that this ^^ will work with all RGH-able xbox 360 consoles right?
Thanks and sorry for asking here.

[No1B4Me420]

I was expecting more.... Still looks like just a xilinx coolrunner clone with all the little extras on board.

[iwanttheagrocrag]

Idk, I kinda like it. Seems more refined.

Edit: Also, it does the different settings for the capacitor and resistor which I've needed to use a few times. Had to go down to the local small electronics store to buy. Had to dig through forums to figure out; what they now incorporate into this device.

This post has been edited by iwanttheagrocrag: Aug 21 2012, 11:59 PM

[effbee05]

May upgrade my Slim and see how the shielded CPU_RESET wire changes anything.