Joined: 1-July 03
Member No.: 46759
I'm sure it doesn't matter which LPC hole to put the wire in but has anyone tried this setup and have it work? i.e.not pulling the trace. Should I tape down the wire so that there is no movement? Which type of tape should I use(black electrical)?
Joined: 14-December 02
From: Lat: 36.0723N, Long: 79.3989W
Member No.: 13361
Xbox Version: v1.0
360 version: v1 (xenon)
He also mentioned the possibility of tugging on the D0 wire from the top of the motherboard and possibly damaging the trace on the bottom.
Sometimes I'll run the alt D0 wire through THREE LPC holes (effectively "tying" it) if someone will be doing lots of plugging/unplugging, so if someone tugs on the wire from the top, it won't pull off the alternate D0.