xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> V1.1 No Soldier In Holes/ Matrix Install, need advice
BOT_toNka
post Aug 4 2003, 04:35 AM
Post #1


X-S Member
*

Group: Members
Posts: 63
Joined: 11-April 03
From: Southern Cali
Member No.: 31793
Xbox Version: v1.0
Okay... so a friend of mine has a matrix and wants me to put it in his xbox. Easy enough, right. Well, his LPC has no soldier in the holes. So the matrix isn't getting aligned propperly (my guess). So i figure i have to put some soldier in the holes. Before i do that, i was wondering if there was any other methods and if not what is the easiest way to fill em with soldier. I'm thinking of taking the mobo out and putting tape on the back of the LPC then cutting little chunks of soldier and dropping them in. Then just go around and tap them with the iron. What about pin headers? Any help would be nice, thanks.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
stlmike
post Aug 4 2003, 04:38 AM
Post #2


X-S Member
*

Group: Members
Posts: 107
Joined: 8-July 03
Member No.: 48312
all MB's 1.1 and above and no solder in the lpc points. i dont see why you will need to fill them. its suppose to be solderless chip. also dont forget the d0 point has change from v1.0 mb. check the site to get the correct d0 point
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
terisk
post Aug 4 2003, 04:41 AM
Post #3


X-S Young Member
*

Group: Members
Posts: 36
Joined: 9-March 03
Member No.: 26686
It is not necessary to fill the holes with solder, the pins should make contact with an edge of the hole while still making contact with the d0. I am not sure how to go about filling the holes. And the pin header isn't what you need for this task...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Ruckus
post Aug 4 2003, 05:20 AM
Post #4


X-S Member
*

Group: Members
Posts: 90
Joined: 24-April 03
Member No.: 33984
You can just cut off bits of solder, and drop them in the spots. I had to do that for a friends 1.2 xbox, and a X2 chip. It worked pretty good i think. But like stlmike said isnt it supposed to be a solderless chip? And...it does not have to be IN the hole...the LPC's have a small metal ring around each hole, and that is all it needs to make contact with.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 24th May 2013 - 04:58 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx