Joined: 1-March 04
Member No.: 103823
I have a problem i have avalaunch 2 xboxes a computer and an cable modem everything is hooked up but i cant do anything with it i was searching this web sight all night and i cant do anything so i sending this to get some help im trying to transfer files between the 2 xboxes and i cant seam to do it i have the latetist version can you help me please. and if i need a file can you tell me where can i find it because i dont have anyfiles for the xbox on my cpu thank you.
Joined: 16-April 04
Member No.: 114561
QUOTE (star^ @ Jan 10 2004, 11:48 PM)
I have a little problem. I have 2 network cards in my pc. One of them are for the internet thats i get from a hub that is connected to a wireless internet concection. The other card is connected with my xbox. I do not want to connect my xbox to the internet so that is clear.
The problem is that when i turn on the xbox and go on the xbox via ftp i loose my internet conection. It just goes down. To get my internet working again i have to unplug the crossover that is connected to the xbox.
My internet ip is 10.41.159.3 and the ip for the other network card is 192.168.0.1. Xbox ip is 192.168.0.3
what to do?
Hi im also trying to connect to my lan(no internet) via wireless bridge to accesspoint and nat router for access from my PC
internal ip is 192.168.0.1.
and xbox via access point 192.168.0.5
Xbox have dchp active where should i put this IP I have avalaunch os
on static ip ? on gateway? now i have 192.168.0.1 at this place
Joined: 11-April 04
Member No.: 113629
i just got my xbox modded i put in a mod chip a new harddrive and evox on it and i want to network it. i am going trough a hub with a broadband internet connection and i am useing flashfxp for my file sharing program every time i try to connect to my xbox it say that it is timed out and tries to reconnect and it just goes on forever what am i doing wrong??
Joined: 27-April 04
Member No.: 116794
allright, i just got my modded xbox yesterday, yet when i attempt to ftp (using crossover cable, all ips appear correct, etc. etc.) it just will NOT connect, im just trying to connect xbox-pc no internet involved
Joined: 6-May 04
Member No.: 118440
Xbox Version: v1.0
hello, im a n00b, with 2 xboxs, i want to hook one up to my network so i can ftp, but i dont have any mod chip installed, do i need one? i have a lynksys wrt54g router, will this work, i also want to play xbox connect, could anyone help me? email@example.com
Joined: 13-May 04
Member No.: 119606
for everyone trying to FTP their xbox to their computer in an effort to try to transfer files..... I used flashfxp, connected to my xbox's IP address. I'm using a linksys router and running DHCP.
I attempted to connect to the xbox while the xbox was waiting for a CD. It timed out, and it continually tried. Then i put in the EvoX cd and immediately it connected. Not sure if it helps anyone, but now i have access to my xbox from my computer.
Joined: 10-January 04
Member No.: 90898
To FTP betewn your X-BOX and PC and geting X-BOX Live to work using USB modens an corssover cable must be conteted to both the Computer (OS dosn't matter) and the X-BOX. You need to set-up an FTP Cince on your PC (I use Samrt FTP) to use the FTP option in EvoX and more. To set-up X-BOX Live with your PC you must set-up ICX so you can get on-line.
Joined: 28-May 04
Member No.: 122339
Xbox Version: v1.4
360 version: unknown
QUOTE (TalinTheLost @ Jan 6 2004, 03:53 AM)
Just a word on wireless.... dont use it if you're going to be transferring large files.
Typical Cat5 cable is around the 80-90mbps (even tho it says 100 - 100 is only the "theoretical max").
Wireless on the other hand... there's different speeds again.
You have 10mbps, 22, 54, and i think there's also a 76 now too?
anyway.. my friend has a 22. the max he can get is 11mbps. i have a 54 - the max i can get is 19-20. and no, this is not just bad settings. what they say is that "54mbps" is only theoretical - its actually not obtainable - they even admitted that to me in the end. was not impressed
anyway...back to the point. even at 20mbps... are you sure you'd want to wait 15 minutes to transfer something rather than 3? no..i'd say not
Wireless giving you actual transfer rates of 54MB or above is BS. You'd be lucky to break the 10MB/sec mark with your card right on top of the access point. If you plan on doing anything besides connecting to the internet, don't do wireless. (this even goes for cards that boast 108MB/sec)
Joined: 3-June 04
Member No.: 123402
Hey, i just got my xboxs a modchip Xecutor 2.3b installed im able to connect my pc to my xbox with a router and program flashfxp! my problem is when i transfer the files it takes forever 10hrs + so i never finish transfering the files! I really need help speeding up the transfer does anyone have any ideas?
my computer amd 1200, 256 sdram, network card 10/100, cable
Joined: 21-May 04
Member No.: 121199
I use dial-up and was wondering how to check to see if I got a network card on my PC. Ive got a place on the back of my computer that is alittle bigger than a phone line. If that means I have one, how would I configure it? I have a HP with Windows 98
Joined: 2-June 04
Member No.: 123283
Please help an idiot out (me), I'm desperate, my girlfriend isn't speaking to me cause I spend all my time meddling with this damn PC
Before I start asking for help you have my word I have read the tuts. I’ve read the tut by fin1581 but it’s not helping me figure this mess. I’ve installed a network card and am attempting to configure it. I am way out of my depth. When I click on the Network option (windows 98) I receive the following message:
“Your Network is not complete. Do you want to continue.”
If I select yes I am presented with the following list
Configuration tab MS family logon Dial-Up Adaptor FD500, PCI Card/Desktop Network PCI Card (my network card) MS Virtual Private Network Adaptor NDISWAN – MS Virtual Private Network Adaptor TCP/IP – Dial Up Adaptor
I just don’t know what to do next do I select my network card and click on add? If yes I am then presented with the following options:
Client Adapter Protocol Service
I don’t know which one to select. Please help, I was well gutted when I came up against this. I just don’t know how to configure this stupid card. Fin1581’s tutorial looked easy but I just don’ know what I’m doing.
Any help will be greatly appreciated. You have my word that I will share any knowledge I learn and assist others in future. It’s what forums are about right? Incidentally I started to just mess around figured the solution might just appear and I managed to loose my internet connection which left my really distraught. I managed to get the connection back my installing the network card. That was sheer luck more than anything. I felt like chucking the card out of the window.