Xecuter 2.2 Lite - Changing Leds, Quick question, quick answer Options

[whiffin]

I see no reason why this wont work, can someone pls confirm

If I get unsolder the blue LEDs at points D1 and D2 and solder red LEDs on D1 D2 and D3 - am I right in thinking this will just work as resistors are all there ready etc??

Oh - and is this right

Positive --|>|-- Negative ?

or is it

Negative --|>|-- Positive ?

Cheers

This post has been edited by whiffin: Aug 16 2003, 08:24 AM

[whiffin]

I should have waited - but being impaent I got out my soldering gun ... so I can now answer my own questions:

QUOTE

If I get unsolder the blue LEDs at points D1 and D2 and solder red LEDs on D1 D2 and D3 - am I right in thinking this will just work as resistors are all there ready etc??

Yes

QUOTE

Negative --|>|-- Positive ?

This seems to be correct

A

[msn25]

i was thinking of doing that exact thing today actually...


are you talking about the LEDs on the actual mod chip? did you change the LED on the switch board too?

[whiffin]

I desoldered (or actually used a screw driver to gently prize off) the two blue LEDs - and soldered a red on on the spare terminals - worked fine

Also removed the blue one on the control board and added a red one - worked fine

Pics to come tomorrow - all my switches, LEDs and HDD LED look ace!!!