xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> No Difference When I Swap The Enable/disable Switc
Disincarnate
post Aug 28 2003, 12:03 AM
Post #1


X-S Member
*

Group: Members
Posts: 67
Joined: 18-May 03
Member No.: 38903
Ok I know you guys will propably kill me for this but yes I used Slayers and setup my new Xbox with a Xecutor 2.2 lite chip. The problem I have is that there are NO difference now when I turn the switch to enable / disable ... Shouldn't the old bios show up when I disable the chip? The blue led is lightning so at least I know I have connected the cable. Any tip here? Thanks in advance! tongue.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
blueoasis
post Aug 28 2003, 03:24 PM
Post #2


X-S Young Member
*

Group: Members
Posts: 35
Joined: 14-November 02
Member No.: 8772
I'm having the same problem myself. After reading through tons of threads on this I haven't really been able to narrow this down. It's either a D0 problem, or an x2.2 lite prob. I've even thought about trying another chip in the future.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Ravenous2000
post Aug 28 2003, 03:53 PM
Post #3


X-S Young Member
*

Group: Members
Posts: 42
Joined: 15-July 03
Member No.: 50077
Are you FRAGing or what is it booting up to. I just insalled a 2.2 Pro and am having the same problem. I think mine may be caused by a messed up D0 or a fubar'd trace.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
brad
post Aug 28 2003, 05:53 PM
Post #4


X-S Senior Member
**

Group: Members
Posts: 163
Joined: 12-June 03
From: Brew City
Member No.: 43515
It could be your d0, use the alternate.

It could also be the switch, check the switches solder points (on the external PCB), make sure they aren't bleeding into each other. I have heard of bad X2 switches around.

I had 2 fubar'd traces and I could still boot, although it would usually frag several times first. My disable didn't work either.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 19th June 2013 - 10:04 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx