Joined: 15-May 05
Member No.: 221174
Can I just replace my Thomson/Philips/Samsung with a Thomson/Philips/Samsung from another Xbox without a modchip? Yes you can do it without the modchip. Just unplug the old drive and put in a new one and you are ready to go!!!
* ok so you can just swap a rom from an UNmodded xbox to another but i have replaced the board in my 1.4 cause it was my first attempt at modding and well i phucked it so i got another off ebay and wow modded it and it works, prob ios it dont read discs this was the issue with the box when i got it off ebay... i tried a thompson in this box of parts from everywhere and it dont work neither , is there a trick to this
also the box dont boot in unmodded mode since chipping alladin xt clone, do and l1 BT points plus pin header it plays games fine off the 80 gb hdd i got from my orig green halp
I did find info tonight saying that halo green is 1.2 not 1.4 which is what i found by following versions tut off here contiunity on pin 2 and gnd??
Joined: 10-September 04
Member No.: 145890
I have a xbox v1.3...
Its a dual boot... 2 HDD's in the box...
I want to know if i upgrade the memory to 128MB... Will i still be able to use XBL with out them ditecting it(Modchip OFF, only 64MB detected)??? And then power up the modchip and use the full 128MB for other programs...
I'm thinking of getting the X3CE modchip w/ control pannel and XLCD... I currently have X-bit v1.4... X-Disk bios (m7.67 FC) i think this is the correct name of the bios...
Joined: 31-July 05
Member No.: 237988
I would just like to let everyone know the following: Using the Mechassault "Run Linux" Softmod I had the power cord unplugged for a period of 8 hours and had an error 16 appear.
The fix, leave your xbox plugged in for a period of 5-10 minutes at the error 16 screen. Reboot and watch your dash appear (I am using the M8 Bios with Evox v3935). Boot to the M$ dash and reset your time settings. Power off and then on and you should be good to go.
Joined: 21-August 05
Member No.: 241846
ok well i have looked all over this site looking for an answer to my question and from last couple of days have not found it so i will ask i do not have a modded xb but i have two of the older gens with crappy dvd drives can i replace them with another dvd rom drive like from pcs or does it have to be out of another xbox?
Joined: 16-February 04
Member No.: 100375
Xbox Version: unk
360 version: unknown
128MB RAM tutorials do seem to be getting a little hard come by now days..
However i do RAM upgrades, but i'm based in the UK, i have a very good price range and i am willing to do upgrades world wide, please of course do remember RAM upgrades aren't available on 1.6 boxes. If anyone is interested please do PM me. Or get me email from my website in my sig.
To the guy above, if your getting error 07 once plugging in a new DVD-ROM drive, and you don't with an old one, your DVD-ROM drive PCB is faulty. Its blocking the IDE channel so the hard drive times out giving error 07 because it can't comunicate with it. Solution: replace the DVD-ROM drive PCB or the DVD-ROM drive for a whole new one.