I haven't done a lot of FTPing but I can use irc, and have downloaded stuff off #xbins. Here's my story:
Xbox = 1.0
Dash = 4290
Kernel = 3944 updated w/ phoenix to 4977 I think

I accessed my hdd using xlinux and hot swap, I tried the font exploit but I was gettin no where so I tried
the audio exploit and it work! Soon after I put my computer back together and now I cant ftp my xbox and I
don't want to do a hot swap everytime I want to put files on my xbox. My evox.ini looks like this

[Network]

SetupNetwork = Yes
StaticIP = Yes
Ip = 192.168.1.69
Subnetmask = 255.255.255.0
Defaultgateway = 192.168.1.1
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0
SkipIfNoLink = No
SetupDelay = 10

[FTP]

Enable = Yes
Password = xbox
IGR = No

I have tried several tutorials

http://get-modded.com/tutorials/BasicNetworking.pdf

with no luck Im using FlasFXP and I have set up my network with different ip with no success,
also some tutorials I can't follow because I can't save my setting in evox I select exit and save then
I reboot and the settings are back to what they were before. Can someone help use these setting
to ftp my box, Im using a direct connection with a crossover cable and when I plug in the cable evox shows

Network

Type Static
IP 192.168.1.69
Line Status 100/Full Duplex
Setup Network Yes
Use Static IP Yes
IP 192.168.1.69
Subnetmask 255.255.255.0
DefaultGateway 192.168.1.1
DNS 0.0.0.0
Setup Delay 10
Skip Setup No



Please help me, Im so close.

did you change your pc network settings? What are you using to connect? NIC to XboX or other way?

I followed the tutorials and changed my pc settings but I couldn't follow
them when they said change the ip settings on your xbox and reboot
because the xbox would revert back to the old settings. I'm using FlashFXP and my NIC thats
on my motherboard that I use with my dsl modem and I unplug the cable to
the modem and plug in the crossover cable to the xbox. But I haven't tried restarting
my computer yet, It's just that I don't know what I should set my computer's IP to,
so I can match my evox setting, and also what IP I should ftp to.

P.S. I'm trying to access the xbox hdd from my computer since I don't have any
apps on my xbox to access my computer from the xbox,(If thats possible Im
sort of a noob at xbox modding, but I did solder mod my PSX.)

your pc nic settings should be as follows 192.168.0.2
255.255.255.0
and change evo-x to 192.168.0.9 save and exit and then try again make sure passive transfer is OFF..(in flashxp)

)You'll have to restart your pc for the network settings take place then change evox..save and try again!