i had bad flash, now i got new chip, and have the one with the bad bios also, dont have programmer, please explain me how to do hotswap step by step please or refere me to
some guide..thanks!

1. make sure the bios that u want to flash is installed correctly in the bios folder and u have eddited ur .ini file to show it (look on the forums this is explained loads)

2. open up box so u have clear access to chip with hd and dvd still connected

3. boot box to evox screen (or wotever dash u flash with)

4. when box has booted CAREFULLY unplug chip from header pins and remove the gnd/d0 and the switch connecter(while box is on so dont short anything out with pliers screwdriver or even sweaty fingers lol)

5. get duff chip reconnect gnd/d0 and the switch connecter(carefully) plug chip into header

6. make sure switch is set to unprotect

7. select flash bios in evox and select your correct bios

8. sit back wait a minute till flash is done

9. put box back together and use LOL

thanks!!! i just thought that what i should do...great, thanks again.

How did the bad flash happen?

i flashed boot from media bios into the mod chip