Jan 6 2004, 08:43 PM
ok i just got my mod chip in the mail. took the chip to my dorm room to install in my x box. i can not remember what chip i got, i just know it is a 2.?? lite plus model. it came with 3 boards and 2 wires a screw and the star thing. 1 wire is black which connects from the main board to the switch. the other wire has a smaller adaptor on either end and is red. this wire connects from the main board to the other board. i have no idea how to install it. it appears to be a 2.2 lite plus because the board is red, however in the install diagrams, the 2.2 lite does not have the second adaptor for the red wire, nor is there a mention of a third board. someone please help me!
Jan 6 2004, 08:48 PM
I hope, for your own sake, that you spelled retarded like that on purpose. If not, maybe modding isn't for you LOL. I'd suggest finding a local installer to do it for you.
Jan 6 2004, 08:51 PM
You have what sounds like a 2.3Lite Plus. Your first mistake is that you bought a Plus. All I have ever heard about them online is how they screw up and dont work. But, here goes nothing. I would recommend that you fill the LPC holes on the motherboard with solder in order to get a better connection, I have heard that this helps. Also, make sure everything is lined up perfectly. Yes you need the second board with red wire hooked up, the newer chips now require it. This is a ground and also pulls power from the USB. You hook the bigger board into the USB controller port that should be coming from the front. The smaller one that a screw goes through is the ground. Make sure this is hooked up nice and good, many problems have occurred with it, I have never had a problem, but you never know. I have heard that if you put an unmelted ring of solder between the ground and the motherboard it helps. Good Luck, and read tutorials.
Jan 6 2004, 10:34 PM
ok, i got that board plugged into the usb in the front of the xbox. now i encountered a new problem. with the switch on disabled, i power up the xbox and get a green light. when i switch to enabled, no blue lights come on, and my xbox turns on and turns off 3 times in a row then the xbox maintenance screen comes up. anyone know what to do?
Jan 7 2004, 04:08 AM
You can go to the following site for instructions on how to install your chip (X2.3Lite+)...http://www.teamxecuter.com/x23b_liteplus_method.htm
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here