The problem is the the location on the board R3G5 , it got suck up into the sucker.

any one knows what is the value of it?

the smalll tiny shit i think is a resistor or diode.

need to replace it cause the cant it in the rubbisk bin

it is 100 ohms, I replaced mine with a surface mount resistor from an old PC mother board. The writing on the chip is 101 (the latter 1 being the mutiplier). Hope this helps. By the way you don't even need this resistor. I used my xbox for weeks before I replaced it. Without it you can get a half green, half orange LED on the front. It looks kind cool, but not as cool as the blue leds I have now.

Will it not be still inside the solder sucker. I wont ask what you were using a solder sucker on this point for

Thanks Man

and do you knwo what is at C7D3
i think i may need to change that too

R3G5 is 1/4 watt 100ohm but you can just join the points with with some solder to make a connection because it is just a power button control circuit. It won't affect the performance of your machine (i have done this several times with no side effects)

true. though I actually mean R3G5 (same one I've had come off the board) and without the points birdged by anything the power button doesn't work. (on my xbox anyway)