Hi All,

I have a serious problem after a few day of using my console with the modification, I tryed turning it on & first it went:

The Green light went on & I tryed to eject the tray but the green light kept flashing & I waited & waited but to no evail.

So I turned it off & then rebooted the console & it would light up green & then turn off & then turn on & then turn on again the third time & flash green/red.

& When I went to turn it off it would beep.


Please let me know what is happening & I appreciate all the help I can get....

Thanks

what chip do u have?? just re-align, or resolder points on the chip from the mobo, it's just a minor align\solder problem. what bios , chip, are u using??

Im using Executer with Evolution X..

Thanks for your quick reply

just resolder the points again and make sure the wire on the mobo d0 point is soldered.
should work fine, also put alittle solder around the ground (where the screw is).
have fun, again

Thank you cykiller I will try it tonight & will let you know....

Thank you

Hey cykiller

My friend flashed the bios again & it worked so for all you out there that have these problems you now know what to do.

It now works like a charm

Merry Xmas