Jun 10 2004, 10:19 PM
Hey guys, I am having trouble loading Evox dash again. I have it installed on my xbox and was working fine. Now I am getting error code 14, so dash won't load. The next porblem is I can't get the evox boot disk to load. Will I be able to access the XBOX over FTP from the service call screen if the dash won't load and if not how can I get a new dash loaded.
Jun 11 2004, 09:05 AM
If Your Box Can't Read Your Boot Disc Try Another Media Type Check My Sig For A Good One.
Jun 11 2004, 09:25 AM
Yeh I have tried alot of other disks, the only ones that boot are the retail games. Now I am getting error code 16.
Jun 11 2004, 10:46 AM
Sorry To Tell you But Your Clock Is Fuck Up. Can You Boot The Ms Dash With The Mod Off ¿
Jun 12 2004, 08:12 PM
Well I don't have a switch for the chip but I use to be able to boot the M$ dash and play retail games. Now I am getting error 16 and nothing boots not even retail games.
Jun 14 2004, 12:29 PM
Check This :
|16 - dashboard - Clock cannot be set. Well i wrote another tutorial about this specific error so here it is:|
When browsing these forums i see more and more posts about clock settings going wrong and posts about error 16. Here the basics for rescuing your precioussss
Basically it comes down to this. error 16 has to do with not finding the menu setting with which you can set the clock of the hdd. This happens to a lot of people that:
1. Erase there hdd (original/upgraded) and after that they dont immediatly install the hdd but leave the xbox without power longer than 5 hours.
It's all about the hdd can;t find the menu with which it can set the clock. This is mostly because the xbox hdd is empty (you removed dashboard or fux0red with ftpp). The problem arises when xbox searches for menu to set clock with, can't find it and voila: error 16. Well read on please!
So you have an error 16 uh? Don't worry "nothing" is broken!
You have an xbox hdd that is locked. And normally you can boot in original and modded mode. Retail or Upgraded doesnt matter. You start playing around with msdashboard.xbe default.xbe that sort off stuff using ftp programs. While doing this you "accidently" remove your msdashboard and also the evo-x dashboard so there is no dash anymore on the xbox hdd. You end the ftp session and after that you shut off your xbox. Normally when you would start up again it gives you an error 13/14 ( no dashboard found). No worries with a slayer evo-x cd all is ok. BUT this is only WITHIN 3 hours or so.
This is becuz the internal clock of the xbox will only be kept alive by the condensators for only 3 hours or 4 . So when you leave your xbox unplugged form electricity for over 5 hours after you have played with the .xbe's AND you have removed your (ms and evox)dash from your xbox than you are fux0red. Why do you ask?
Why can't i boot from cd?
Its as follows
Xbox starts booting==> (almost 1st thing a xbox does is) searches for internal clock==> doesnt find internal clock becuz there hasnt been any electricity on the xbox for 5 hours so battery that kept clock alive is empty and clock is gone.==> searches for the proper dashboard menu to set clock with ==> doesnt find msdashboard or evo-x dashboard menu becuz you d*mbo have removed it from the hdd for whatever reasons you had==>xbox gives error 16: cannot set clock.
So what do you do about it? Two options!
1. There are some bios'es around that allow the chip to boot past the clocksetting. (do a search!).So how do you get that bios on your chip becuz you cant boot to a flash program or something. Well you need to have an external flasher.
Hope This Help
Jun 14 2004, 01:51 PM
Thanks I really appreciate that, now I need to find the tools. I as searching for that qoute but can't seem to find it. Is it in the tutorials section?
Jun 14 2004, 03:00 PM
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here