Aug 3 2004, 08:02 PM
OK, this is the problem, i had the xbox running fine with Avalaunch Dash, then wanted to see what NeXgen looked like, so i copied the files over to the root of C:\ and renamed the nexgen.xbe to evoxdash.xbe - then thats when the trouble strated. The Xenium OS [1.1] booted fine, i selected the m8 bios and it loaded up, but it went to the Error page and displayed `error 13`. I have tried to load slayers again but it won`t load the dvd [and it did when i first installed on this xbox], so now im sat here with an xbox that won`t do diddly squat, any help would be appreciated....thanx
for those that can help...
Aug 3 2004, 08:44 PM
The error means the a dashboard file is missing, boot off the slayer disk or set FTP up on the chip and check you files. I would also check your chip and make sure is making good contact...
Aug 3 2004, 08:59 PM
The mod seems to be working fine, as i said before it boots into the OS and it loads the bios, how would i set up an ftp to the hard drive, i ask this because i can`t get the slayers disc to load, if there is another way then let me know...thanx
Aug 3 2004, 09:32 PM
This happened to me last night try a diffrent BIOS like M7, is you box an older one?
Aug 3 2004, 09:36 PM
if you can't get the boot disk to work then maybe you can upgrade to os2.0 without using the hdd(if you can burn it to a disk instead of putting it on the hdd and doing the os upgrade) because it has a built in ftp server(i think?) I'm not 100% sure thought(I'm still on OS1.1)
Aug 3 2004, 09:38 PM
Ive tried M7 and a few different bios`s, i have put in another xenium loaded with OS2 and i`ll ftp my working dash from my other xbox to this one and see what happens, if that fails i`ll have to use the copy or back wizard in xenium OS as a last resort....
Aug 3 2004, 09:43 PM
You are right OS2 does have a built in FTP server, it's slow but works...
Aug 3 2004, 09:59 PM
Yep it does, and is no good in this situtaion...
Aug 3 2004, 10:02 PM
how did you install the chip? solderless or solder
Aug 3 2004, 10:07 PM
try formatting c partition
Aug 3 2004, 10:10 PM
I have installed it with the solderless adaptor, i have done a few of these installs for other ppl, and they have been perfect, like i said, the problem i have is that when the bios loads it won`t load slayers from the dvd-rom , it goes straight into `error 13` and then frags, so im thinking it can`t be a hard drive problem [though the error says so] because, when you fit new retail drive it has nothing on it, and it loads slayers from the dvd-rom....so this one has me stumped.....
Aug 3 2004, 10:42 PM
Send it to me and i'll fix it..
Aug 3 2004, 10:55 PM
Well...it looks like i have solved it, i was using a 40GIG wdc, just for an experiment i put in the original OEM drive that i had configurered with Evox dash, and guess what...it loaded up perfect, how strange is that....so it must have been the hhd, but it still puzzles me why slayers would not load...unless the hard drive has got bad sector error or is just F@#ked - now to try another hard drive......
thanx for the replies
p.s. you can have this for helping
Aug 3 2004, 10:57 PM
p.s. x 2 - i did format the c:\ partion and still no luck...and so the strangeness continues....l8rz
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here