Sup guys, right now i have a tsop flashed V1.0 box with EvoX and a bunch of other apps loaded, i am going to be putting a chip in, mostly so i can switch between legal and hacked bios to go on live, im just wondering how you reflash the tsop back to orig, also, i guess i should add that i was not the one who flashed it to begin with, so im pretty new at this, ive pulled the mobo and the two write enable jumpers are still soldered, is there anything else that needs to be done in there?? then what is the procedure to flashing it back, any help would be greatly appreciated, thanks

Wacki

TSOP on a 1.0 has a 1mb chip, so you can flash it with 1 original bios and 1 hacked bios, and add a switch.

You will efectivly has a free modchip, and the ability for live.

So how would you flash it, thats my most important question.

Flash it with evox....use kernel 4034...if u are going to get a gen4 mod then flash the entire tsop with 4034/1mb bios, if u are gonna go the split way use a 512k hacked bios and a 512k 4034 bios...Here

I would only do the split if i weren't getting a gen4....

Sorry bro, but thats what i dont understand, how to flash it with EvoX, i havent seen any options for flashing anything in my EvoX menus, thats where i would assume that it would be, im thinking maybe the person that did this for me might have left that part of the program out so that noone would accidentaly flash it and render it useless. Thanks.

Anyone???

You will have to add this line to your evox.ini:

Item "Flash BIOS",ID_Flash_Bios

You may have it in there already, just commented(#) out.

Put the 4034.bin file in your c:\bios directory

Reboot box, flash, select bios...... dont forget to make sure your hardrive is locked...... maybe backup it's key too just to be safe......

The 1.0 xbox is like gold in the modders hands.

Ok, ill check that out StrictPuppet, thanks for the help.

Spiffeyville, that has to be one of the sweetest things ive seen in a profile, that chipmunk is sweet.