X3 installed, flashed and dose not work right... When turning X3 bios on. The Xbox reboots 3 times, screen is blank and the Xbox frags red & green. I can get into Xbox bios and play games fine, I can get into the load bios screen and load bios fine. But turning the mod on, Nothing. Its like the flash I used isn't there.
All soldering ok. I dont understand what is going wrong. Any ideas, please help.....

What version box do you have?

You may have flashed the wrong version bios to the chip.

And just to be sure check you're soldering.




-ruli00

Make sure if you have a 1.6a/b you are flashing the v16.bin and if you have a 1.0-1.5 you are using the other .bin.