I softmodded my friends xbox, and tried to install UIX as another dash for him to go to. I used Krayzie's Splinter Cell uxe install on his 1.1 version xbox. For some reason whenever i try and go to UIX it freezes. I had it set-up both as uix.xbe and default.xbe, but had no luck. I use it on my xbox v 1.0 with x2 5035 bios and it works great. Any suggestions would be awesome. Thanks for releasing such a good dash, i cant wait until 2.0 comes out.

RooR

Make sure you use the .xbe file that supports most bios's

I installed UIX onto 2 xbox's today. Using krazies UXE v2.8 SC version.

Xbox's were version 1.5 and 1.6 and both are working fine.

I transfered it straight from my xbox [ v1.0 ] to thiers using avalaunch and i had no problems. Make sure that everything is being copied over [ Fonts and .xip s ] and make sure that your using the fixed .xbe as it was not booting without the fixed .xbe on these xbox's

Also iit may take a min to boot up as it is adding programs to the cache and caching itself.

If all else fails re-download UIX and install it fresh to that xbox. Or just talk to someone in #teamUIX in IRC

For the people who use soft mods, UIX v2.0 will work perfect on any softmod. Not that it matters to you right now but the small problems have been taken care of a while ago.

Did you forget the font and audio folders??

but theres one big problem with my softmodded xbox!

after the bootvideo sequence there are graphic-errors just 2 or 3 seconds before uix is loaded!

why is that ? i ve got a 1.6 xbox with 007 ltools

That is a problem with the cache. Just go to the MS dash and delete the UIX Saves and reboot UIX and it will load up fine.

jeah man but that was not it!

i deleted the saves of UIX but then, after the next reboot it tooks the xbox half a minute to load uix and after that the graphic-errors came again!

and there had been a second problem too!

sometimes if i switch to "HARD DISK --> DASHBOARDS or APPLICATIONS" my xbox restarts automatically! i think UIX is not very stable yet!



so i ll have to go back to my unleash x but i am going to try some other dashes today

thx

and if someone knows something about my problem just post.. maybe i am going to reinstall UIX thx

Sounds like the skin your usin is Messed up. Switch to a Preset Like Blue or Orange or Yellow. Then try it. And UIX is VERY STABLE.

i use BLUE CUBEWALL !

... does another skin solve the "restarting" problem ? or both problems ? i mean.. the graphic-error problem too ?

seams not.. cause the prob came again BUT the green skin was loaded after that.. and not the cubewall!

and another thing.. both saves ... in the saves manager are named: "defect"
the one was not bigger than 20 kb but the second one was nearly 9 mb big!
i deleted them .. i dont think^^ that the graphic-errors will be solved ^^ after that

i was right....

with every skin.. the problem comes.. both problems i mean ;(

graphic-errors and shutting down problem

UIX does those problems sometimes when you are Extreamly short on space. Make sure you have at least 200mbs Where ever UIX is stored.

Either that or his uix.ini isn't set up properly.
If you try to enter a hdd menu and it reboots it usually means it's looking for a folder that isn't there. Check and make sure the spelling of the actual folder matches what the dash is looking for. As for the graphic errors, if you mean like a quick flash of white and other color lines on a black bg and then the dash boots... thats normal for almost anything. It's basically the TV switching the video signals. There wouldn't be a way around it.

oh your both explainations seem to be right, cause I DO ONLY HAVE 200mb of free space on my hdd

i will try it again, and i will look for the uix.ini and after that, i will tell you what happens after startig again



so theres a small video of the so called^^ "after boot problem"

Video, 2mb, bootproblem

just klick on FREE .. scroll down a little bit and u find it .. and then you ll find the BIG DOWNLOAD LINK after 30 seconds (download ticket^^ )

and then you ll see my prob (sorry but i am austrian and thats why the download page of my video is in german^^)

Dude that has to be your bios fucking up. The white lines are actually the "MS" that should be at the bottom of the screen. If it's only doing that when you have UIX as the main dash I dont know what to tell ya. That'd be something for JbOnE.

jep UIX is my default dash!

and i have now 2 gb of free space but the probs comes again and again^^

damnit ok i hope someone KNOWS something^^ to HEEEEELP me

PS: XBOX: Version 1.6

BIOS: EVOX M8

softmodded^^

okay uix itself is working PERFECTLY only that it is in english (cycle, reboot, power off.. and thats written with CAPS LOCK^^)

but i am austrian and i want to RENAME that in german ? is that possible or not ?

PS: however this.. graphic-errors are here! i hope someone knows how to fix it!

I'm having the same problem but mine is Deutsch and I want it to be engilsh

also on another xbox nothing show up in the apps, game, emu, and dashboard sections the paths are right and it something in the folders I can find them with the file manager but they don't show up in the menus

I tried deleting the save game but that didn't work

lol in Deutsch my natural language Lol^^

hehe and i want it in DEUTSCH but COMPLETELY in DEUTSCH *g*

and not things like.. REBOOT, or... CYCLE



and the 2. thing is as you know.. my graphic-problem.. and if i cant solve that i think i ll have to change back to unleash damnit but uix is so .. POWERFUL .. HELP MEEE

Theres a dutch.dat language file but things such as REBOOT are written directly in the code. Only way to change them now is to edit the xap for your liking of what u want it to say.
Maybe it can be adapted to also be included in the language.dat's in future releases.

I got the language to stay on english, I had to go back to the xbox dash and save it then reinstall UIX and it worked. I got the paths to work also, but it's more of a work around, so everytime I add something to a folder I have to rename the folder and update the path for something to show up

thought I would post it if anyone else had the same problem

damnit i hope someone of the TEAM UIX will take a look into this thread
I WANT TO HAVE UIX wahhh

anima322you should try something like X-Selector. This way it'll load that first and you can load uix from that pretty fast.
That's the only idea I can come up with for ya. Hope you get it figured out.

IDK about the fast part but it works for me. With X-Select 0.9 i am able to Use BlackStormX as my main.

ehm ok but... I DONT WANT to SELECT it.. i just want it to start as my main dash wenn my xbox boots

thats all.. TEAM UIX is that so HARD to do ?? *g*