Jul 24 2005, 09:13 PM
i donīt know what more i can do...i had installed correctly my xbit, touch in d0 point
flash wiht exox m8...iīm sure de chip is touching in d0 point !
but when i turn on my X, the xbox shows a green light then a reed one, the a green the red...and the xbox doesnīt work!!!
what should i do ? please help me
Jul 24 2005, 10:43 PM
Its not aligned properly, or you have the dip switches set wrong, or you have flashed it with a corrupt bios.
Jul 24 2005, 11:55 PM
Try flashing it with an older bios like X2 4983.06 (Pretty Sure Thats the name) i used X2 and it work perfectly. Hope i helped you.
Aug 1 2005, 04:46 AM
the no solder method on this chip can be a real pain in the a$$ to deal with, if you check your switches and try your new bios and still it does this it is the alignment of your chip and you may want at this time to consider trying to solder it in.
Aug 1 2005, 03:48 PM
I had this problem when I put in my XBIT. get out a flashlight and watch and LISTEN for the D0 pin to seat it should click in place. other than that make sure you have a good bios and flash ALL of the banks on the chip. there is also a good post on how to flash in this forum titled 'Solved Problems Flashing V1.5'
if you are still having problems take a look at that
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here