I have had other thread on my xbox but im finally finished, inless some suggest something that would look really good. Please keep in mind that this is my first ever modded xbox.....

Here is th top with the cleared jewel.


Here is the front and yes i did get a X3 control panel. It also shows the lighted controller ports.


In the dark showing the panel.


Close up pics of the controller ports.



The screen ( i know i need to set the time and date)


Top lit in the light and dark.



not pictured..... 120 gb Seagate HDD

please rate out of ten... also i know its nutin new but what do you expect from a newb?

awsome. 8. not a perfect ten because i think the jewel looks kind of funny and its kind of the usual things. but very good job nonetheless

yea that jewel does look alittle wierd cause i uesed LED's and not a cold cathode

Looks like alot of work, good job. I would give it a 7 for one reason, why not put two leds on the port instead of just one. Aslo pics dont show that much detail so i cant tell if you bought the face plate with the lcd cut out or if you did it yourself. non the less looks nice

not bad for a first timer, ill give you an 8, keep it up.

i bought the control panel i said that.( well i dint say that i bought i but that is the only way to get it) NAd can i do another elds in the ports or not? cause i drilled in the middle....

oops sorry I didnt read your post just looked at the pics (tired) and if you want I can send you some pics for a dual led port mod I have done

you drilled the port? you can take the metal off, and theres a gap on the 2 sides and a 3mm fits in nice and snug. do you mean to say you drilled the metal and put it in the hole? because thats removeable.

^^What he said^^^

yea.... i followed a tut on the site.... oh well i think about it tommorow also the pics would be nice of the dual LED port mod

sweet lookin box, i like very much

the ports can still be corrected though.. just take the led out and cover the holes with some electrical tape.. and if you DO attempt all this.. very gently pry off the metal cuz u WILL need it again.. but nontheless your box looks good.. i give it an 8

4/10

just being honest

i will give it 8/10 good job keep it up

did you clear the black le jewel or a different one? also, it looks wierd since you didn't cut the jewel hole underneath...


i also believe this is the first le i've seen with an inward facing led ring.. most people use outward facing ones.

ill give you an 8 looks nice

10/10! This is one of the coolest looking Halo Edition Xbox's i've seen! Well...Apart from my stock one jks, it's awsome! Gives me new ideas on what to do to mine now! Also, the screen makes it that much better!

im with the others, 8! it would be soo cool if you could get the X3LCD white on green instead of white on blue, it would look so much better!

hmm its ok i will say 7

i woul have faced the leds outward but nice 6.0

7/10 because you need two LED's in each port. Otherwise, it looks awesome! Keep up the good work

Nice LE case too

4/5 since you didn't exactly do much to it.

6.5 out of ten because the black le jewel that comes with it is so much nicer looking than that.

Same as Arjun, 4/10. Atleast cut a jewel hole.

On a side note, why does everyone have all those oversized mech sigs?

IMO its retarded to cut a hole in a LE...just a dark jewel w/ an outward facing ring does it for me


sS

because as long as we dont have any writing its about the same size as most peoples

He has a point.

That would work... if he had a dark jewel, but it's clear. Just my opinion though.



My Sig Dimensions = 450x125
Your Sig Dimensions = 450x250
Thats 125 pixels too tall.

quit bitching.


I say the xbox is a 6/10. Nothing real special, but it does look nice.

If one or two people are allowed to break the rules (other than mods, cuz its not against the rules for them to have slightly bigger sigs) then were going to have everyone wanting bigger and bigger sigs and then mods will have to deal with them all

I said it was my opinion about his jewel being clear, it just looks strange with all that excess plastic behind it.

I've decided to change my vote, 5.5/10.
Due to me loving LEs so much. Even though I've sold most of mine away allready.

7/10

and sorry to hijack your thread, but do you need the metal on the controller ports? if yes why?