kenshinmokota
Jan 20 2006, 12:16 PM
now yesterday i made (lucky am) a backup using evox (slayers)
backup folder that includes (Bios,disk,eeprom,hddinfi,hddkey)
now heres what happened i was ssetting the video options in XBMP and my small brother came and missed thesetting and changed 4:3 to something else
and now xbox is dead it wont load anyting on screen
nothing shows up
when i turn it on nothing comes up and and after 40 seconds or so it turns off
plz help me
note: i have a full backup of my c:drive
kenshinmokota
Jan 20 2006, 12:49 PM
BTW am using a v1.6 xbox
and i think aladdin chip
i bought it pre-modded
andi cant now load anything since nothing comes up on tv and the console truns off or restarts after like40 seconds or so
someone help please am getting tortured just bought the console 1month ago
MantaADSL
Jan 20 2006, 04:06 PM
Was XBMP your default dash or how did your xbox boot? EvolutionX possibly if slayers was installed. 1 option would be to get a copy of slayers autoinstaller disc and boot from it to reinstall missing software but can't be sure as based on what dashboard you have booting to. If booting to EvolutionX as dash their is no way that your brother making changes to XBMP could affect booting. Another possibility is that machine not booting up correctly has it flashing light from green to red as it restarts etc. Can you provide more info as may help to find correct solution.
D
JayDee
Jan 20 2006, 06:44 PM
http://forums.xbox-scene.com/index.php?showtopic=91520Reading the pinned topics are often faster and better then skipping it and just post the question...
kenshinmokota
Jan 20 2006, 09:17 PM
my machine is ntsc-j
andi am using a slayer dash evox
just installed it
here what i did now
i made this cd enigmah or so with the whole 50-100 dummy but nothing worked
i booted it with cables unplugged and waited and press b and switched off and on (plugged)
nothing happened
what can i do now some one help i just bought my xbox 1 month ago
should i go and borrow an ethernet card and will it work ???with av cable unplugged ?and will it help me ?and how?
am freakin out
kenshinmokota
Jan 21 2006, 06:04 AM
come on someonehelp me please
@ least i have a full backup for everything eeprom and hhdkey and all the cfe drives
deadparrot
Jan 23 2006, 09:27 PM
QUOTE(kenshinmokota @ Jan 20 2006, 08:24 PM)

i booted it with cables unplugged
I think that was a mis type in the tutorial, the Xbox doesn't boot unless you have the cables plugged
in.
JayDee
Jan 24 2006, 01:03 PM
you CAN boot with the cabels out....
deadparrot
Jan 24 2006, 06:07 PM
I've always had it flash orange on me, didn't know there was a way to do it without the cables...
JayDee
Jan 24 2006, 09:59 PM
Yes, it flashes.
But have you tried to FTP into the xbox?
I know it works with older X2 bioses as that was what i used when i wrote the tutorial, and i know that it works with the x2 5035 bios as i just tried that...
deadparrot
Jan 24 2006, 11:05 PM
I never actually tried FTPing, but my boxes are softmodded, so I doubt it would get too far...
JayDee
Jan 25 2006, 02:57 PM
A softmodded xbox should use the virtual eeprom and a simple reboot should fix the problem.
The issue with softmods is that alot of people use old exploits and wont have a virtual eeprom. I can check if my softed box can be ftp:ed into with the cables out...
JayDee
Jan 25 2006, 08:27 PM
Works great with a softmodded xbox (1.6) too...
Exploit packaged used on it: Krayzie´s Ndure MA Installer
deadparrot
Jan 26 2006, 08:00 PM
That's odd. Doesn't work on mine (Krayzie's too) but perhaps that's down to my custom NKP with no virtual EEProm. It just gets in my way, really.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.