i soldered in my spiderchip 1.1 with the pinheader describe here http://www.hackdabox.com/spiderchip_solder.html. my xbox frags but only when my chip is connected to the d0 point. i also used the alternate d0 point on the back side as well as on the front. i got it working without soldering only 5 times. the 1st time i flashed with evox m8 plus. found out those dont do good on xbox 1.0's.
the other times i got it working was after the bios flash. it would boot up with the evox logo in the corner but to no dash. i could boot originals but not to evox or backups. i used my spider programmer and after about 8 hours i had flashed the x2 4794 bios. still to no availl it frags. wtf is the problem

Thanks for any help

sorry wont let me delete this repost

no help at all