well hello all,

As I saw on the diagrams, with the flashrom, you've got to point a solder point to 32, but must you link this on the Motherbord of the xbox first, or connect this one, and point 32 to pin 32 of the flashrom ?

At one site they mentioned : (Points to(MB)) and I presume MB stands for motherbord.

Tnx,

Djbase

You can either run two wires from pin 32 on the flashrom, or you can wire between the two points on the board and run a single wire from one of the solder points to the chip - it makes no difference.

Ah tnx for the reply

Then I can continue my operation

Greetz,

Djbase