Hello,

I'm currently trying to make my X3IR work as described by switching on the Xbox with mod chip enabled, but unfortunately it doesn't work properly.

It does however switch on the xbox with the mod chip disabled when either pressing the Display or Select buttons.

I've connected X3IR to my PC via a serial cable and I've been able to read and write codes to the chip. I've tried different buttons but none allow it to switch on enabled. Does anyone know what could be the problem?

I've also tried to "Learn" other remotes such as the Xbox 360 one, but it only seems to be able to read the Xbox remote and no others at all. Should it work with any remote?

Many thanks

The default setting is a bit mixed up, the timer is wrong.
Change the timer to 10ms(I think it was) for mod enabled.

Thanks for pointing me in the right direction - I found that 50ms was the best setting because at 10ms it wouldn't detect key presses at all - so everything is working a treat now.

Cheers

50ms worked perfectly.

Thank you.