Hello all,
I'm new here and have a question, I installed a X3ce in my machine with no problems, so i'm doing another for a friend, after hooking it all up i plugged it in, and the chip didn't com on, I took it all apart again, went over my soilering points and put back together, when i power it up all the lights on the chip are on, and the lights on the outside controler are on, if i power the machine with a long hold on the button it loads fine, BUT if i do the quick tap of the power button, the machine turns on and off 3 times, then stays on but theres nothin on the screen, and the control panel is red, and the eject button is flashing........
any idea's
Skippie