I will be putting Green LEDs in it, and a ECU (Extended Cooling Unit - runs the fans for 5 minutes after it's turned off)
i am assuming that the +5v (that i need for the ECU) is unswitched from this page: http://www.xboxchopshop.com/catalog/man_360_volts.php
Grounds and a 5v "unswitched" point can be found by the power supply plug. This 5v is on anytime the 360 is plugged in, and is not switched by the 360 power.
The 5v can be found on this pic i made:
I might replace the fans with different ones at a later date, but i have no complaints with the current ones.
First i want to all of you to never strip wire using your teeth, as i kinda did a little damage to mine:
get your intercooler!
open up the power area! Cut off the 2 connections and carve some plastic off the 5v wire!
get a 5 LED Lazer LED (i'm using 2 of them)
Open it up!
sorry, the chrome reflects the flash. There is a lot of hot glue in there, so it might not want to come apart.
take all the chrome off - might be hard with all the hot glue! (repeat steps 3 - 5 on the second LED)
get your ECS!
get the power cord for the ECS and cut it off!
more comming soon.
i need to get some heatshrink!