I can't seem to get my xbox to read any media i burn i have tried straight Evolution x and slayers 2.6 auto install keeps saying disc is dirty. Used cdr,rw, dvd+-r,rw nothing worrks. I have a version 1.3 xbox with samsung drive and a xecuter 3 ce modchip thanks in advance

Are you sure your modchip is connected right? If it's not, you could be booting to the original dashboard, which would give you that message.

Yea i have the modchip connected right but how do i put on a new dashboard it won't load the cd from boot without going to the ms dash

any ideas on this?

Sounds like your chip isn't on. And do you have an EvoX compatible bios?

My chip is on and i have the x3 bios build 3294

I can go to the bios and bring everything up. Do i have a setting wrong cause after that i can get to the ms dash but thats about it and it won't load any disc that i burned on it

Well, it shouldn't be loading to the MS dash at all if you have a bios on your chip and your chip is on... this is AFAIK of, of course.

Well it loads to the chip bios but thats about it it won't load my disc or anything im not sure if i burnt it right thats also a problem im using slayers v 2.6 auto install and when i do burn it it will load to ms dash and tell me its dirty so yea anything i can do not to load to ms dash i mean i can't really find any guide to help me

What specifically happens when you turn your xbox on?

i get the xbox screen with the xecuter logo instead of the MS logo and i have it set to go straight to the dash which is the ms dash

Well, why not turn that off? The thing is, when you put in the DVD/CD that you burned the iso on, you have to power the xbox off and on a few times. If the MS logo appears at the bottom, then it's loading up. It takes me a bout 15 tries or so before I get the disc to load up. Are you sure as well, that you burned the image right? Because if you just put the image on the disc like any other old file, it won't work.