Ok i just installed duoX 2 gs white and i burnt a CD, but before i knew i needed a dummy file for flash i used a CD-R in my xbox and flashed the cromwell file and it turned off my xbox, then when i turn it on it went on for 2 sec then off then on then off then on and it has no video and the light flashes. PLZ help





ty

you flashed the wrong size bios to the chip
make sure that you flash a 512kb bios not a 256kb

so um...how do i fix it???

you switch to the other bios bank to loader the other working bank, then just before it flashes with the new bios you switch it back to the bad bank for it to rewrite the bad bank

but when it is on the working bank i get NO VIDEO OUTPUT but my xbox led is red? (thats linux bank 0)


so what can i do now????????????? ty for helping me

Did you already try flashing both banks??? Cause you can load both banks just fine on everything except v1.6, and on that one you can load bank 0 just fine (cromwell), but can't load bank 1 (flashbios) and get the problem you described.
If you just mistaked the banks and you do have a 1.6, then it is really your own fault for flashing your only working bank.

ok ty i do have 1.6 and it still dont work but thank u for helping me


if u find anything that i can do then please help (reply form) or Mikey8943@hotmail.com E-mail me

THen it is already your own fault for flashing the only working bank. You will have to hot swap using another working chip. Next time do things properly and you won't ne asking for help.
When you only have 1 working bank, you always boot that bank, and flash the other bank. That way if you mess it up you still have the original bank to go back to.